Posted By: Dduster
Best Intake Manifold? - 11/04/14 01:48 AM
OK, I'm sure this topic has been kicked around before but...: What is the best intake manifold for an rb block @ 500 ci with a dominator? 
Best Intake Manifold?
Posted By: Ari440
Re: Best Intake Manifold? - 11/04/14 02:18 AM
what heads are you using
standerd ports .........M1 4500 or victor 440 intake and 4500 adapter
max wedge ports 440-3 or 440-2 with 4500 adapter
standerd ports .........M1 4500 or victor 440 intake and 4500 adapter
max wedge ports 440-3 or 440-2 with 4500 adapter
Posted By: GTS340
Re: Best Intake Manifold? - 11/04/14 02:30 AM
Quote:
what heads are you using
standerd ports .........M1 4500 or victor 440 intake and 4500 adapter
max wedge ports 440-3 or 440-2 with 4500 adapter
Super Victor is 4500 and offered in standard and Max wedge.
Posted By: Thumperdart
Re: Best Intake Manifold? - 11/04/14 02:33 AM
Quote:Low deck here but the Victor/adapter was faster/better then the M-1 for me at that time. Plus of course the "treatment" on the dommy will finish it off.
OK, I'm sure this topic has been kicked around before but...: What is the best intake manifold for an rb block @ 500 ci with a dominator?
Posted By: Dduster
Re: Best Intake Manifold? - 11/04/14 02:37 AM
B1-BS heads. Whose 4500 adapter? Doesn't the manifold come with a dominator stud pattern or is the adapter to optimize airflow distribution? I gotta put on my T-Stop too, don't want an adapter if I can avoid having things stacked too tall for current hoodscoop. Thanks for the input 
Posted By: GTS340
Re: Best Intake Manifold? - 11/04/14 02:44 AM
The Victor is 4150 only. Need adapter to run a Dominator, or run a super Victor which is 4500, has more plenum volume too.
Posted By: DaveRS23
Re: Best Intake Manifold? - 11/04/14 02:48 AM
When I use a Dominator on a 4150 manifold, I get 4 aluminum bolts and tighten them in to the bolt holes. The cut them flush and drill and tap the Dominator pattern. Studs are a little safer here, but not required.
Posted By: Ari440
Re: Best Intake Manifold? - 11/04/14 02:55 AM
your heads are standerd ports ?
give you an idea how tall it gets
Posted By: Dduster
Re: Best Intake Manifold? - 11/04/14 03:12 AM
OK,.. adapter makes sense for a 4150 flanged 'Victor' intake manifold. I see 'Super Victor' as the winner with my using a T-Stop. Thanks Guys
Posted By: AndyF
Re: Best Intake Manifold? - 11/04/14 05:18 AM
Super Victor is probably the best 4500 intake with std ports but the M1 4500 is also a very good intake. The M1 4500 is shorter than the Super Victor so you'll have more room under the hood. There doesn't seem to be a lot of people who use the M1 4500 but I've found that it makes pretty good power.
.jpg "8320722-AR005a(Large).jpg")
Posted By: d7cook
Re: Best Intake Manifold? - 11/04/14 05:48 AM
Quote:
OK, I'm sure this topic has been kicked around before but...: What is the best intake manifold for an rb block @ 500 ci with a dominator?
I use a mopar 337 intake with a dominator adapter. Very good intake and the built in valley tray is a nice feature. As cast the ports are in between std and MW.
