Posted By: VernMotor
Pictures of fore/aft locators installed. motor plate - 07/20/14 04:07 PM
I can't do them on the trans. Because the ears with the holes are cut off. both my trans are that way. so need some ideals Thanks
Quote:
I can't do them on the trans. Because the ears with the holes are cut off. both my trans are that way. so need some ideals Thanks
Quote:Quote:
I can't do them on the trans. Because the ears with the holes are cut off. both my trans are that way. so need some ideals Thanks
I thought using the trans ears was a NO-NO
Quote:Quote:Quote:
I can't do them on the trans. Because the ears with the holes are cut off. both my trans are that way. so need some ideals Thanks
I thought using the trans ears was a NO-NO
I know many do it. sure would be easy ? I would think it would work ok.. But I do not know that for sure. Anyone here do it that way and had problems ?
Quote:
But you run a mid plate. If I did that I would break tail shaft housings.
Quote:Quote:
But you run a mid plate. If I did that I would break tail shaft housings.
I would never solid mount in 3 locations.. when the
chassis flexes something has to give.. and the tailshaft
is the weakest point
Quote:
But you run a mid plate. If I did that I would break tail shaft housings.
Quote:Quote:Quote:
But you run a mid plate. If I did that I would break tail shaft housings.
I would never solid mount in 3 locations.. when the
chassis flexes something has to give.. and the tailshaft
is the weakest point
then you need to build a stiffer chassis
Quote:Quote:Quote:Quote:
But you run a mid plate. If I did that I would break tail shaft housings.
I would never solid mount in 3 locations.. when the
chassis flexes something has to give.. and the tailshaft
is the weakest point
then you need to build a stiffer chassis
LOL... like yours dont flex
Quote:
Jamie.. I've seen a few guys that made a bracket that
used 3 of the oil pan bolts and then to the K-member..
I believe they actually used studs(on the side of the pan)
Quote:
My chassis guy built a bracket that bolts to the pan rail. Hard to see the bracket in this pic.
Quote:
My KOS Demon has brackets on the frame (or K frame) for something like this. I did not get the motor attachments or connectors. Thanks for the pics. Any more?
Anyone fab up the motor side attachments or is that a unique deal?