Moparts

Smallblock midplate

Posted By: W7 Duster

Smallblock midplate - 07/01/14 01:40 AM

Who makes a smallblock to 904 midplate. looking for .090 steel. Everyone lists it for a 727.

Posted By: all spooled up

Re: Smallblock midplate - 07/01/14 01:58 AM

? why whould thay be different

Posted By: W7 Duster

Re: Smallblock midplate - 07/01/14 02:02 AM

The starters are clocked different.

Posted By: all spooled up

Re: Smallblock midplate - 07/01/14 02:06 AM

did not know that

Posted By: MR_P_BODY

Re: Smallblock midplate - 07/01/14 02:10 AM

Quote:

Who makes a smallblock to 904 midplate. looking for .090 steel. Everyone lists it for a 727.

Just make your own.. very simple... and cut out for
the starter so it sets flush with the trans so you
get full gear engagement

Posted By: tubtar

Re: Smallblock midplate - 07/01/14 03:00 AM

I found out the hard way sort of........my mid plate was in a batch of other stuff I got from the secondary market , but I was more than a little surprised when even a hammer wouldn't make it work.

I don't know if anyone makes one , but you could use about 75 % of the 727 one as a template if you want.
Hold it up to the trans and see where you need to cut , get a sheet of .090 mild steel and you should be cooking with gas.
Let me know if you want to try it and I can ship the plate / template to you.
Just send it back when you're done.

Posted By: fishy340

Re: Smallblock midplate - 07/01/14 03:01 AM

Chuck comp engineerin makes a nice one.Its for a sb mopar engine trans don't matter & cut the extra off it for header clearence.

Posted By: 1967dartgt

Re: Smallblock midplate - 07/01/14 04:49 AM

Try s&w race cars.

Posted By: 408Dust

Re: Smallblock midplate - 07/01/14 10:43 AM

nhramark he is a member
mailto:nhramark@gmail.com