Posted By: als499
Dominators on M1 tunnel ram - 05/16/14 11:31 PM
Has anyone tried running 4500 Holleys on the Mopar M1 tunnel ram? I just set a 4500 gasket on an M1 tunnel Ram top and it looks like the bolt holes line up if you twist the carb. a bit and open up the opening, there is plenty of material. Not sure if Chrysler designed this to happen but it looks pretty easy to do.
![8146673-001.JPG Attached picture 8146673-001.JPG](https://board.moparts.org/ubbthreads/upload2/8146673-001.JPG)