Hemi Head?

Has anyone seen these heads first hand and what the quality like? Who's the manufacturer of the heads? http://www.ebay.com/itm/426-Hemi-High-Fl...d2c&vxp=mtr
Thanks for any and all info
Kevin

interesting. Looks like a copy of a stock steel head.

quote from seller:

Hi - these are based off of the updated Canfield molds. Cast by the same foundry as Stage V heads. Final machining done by me. You will not find them in this configuration elsewhere. thanks!

Canfield head bought by INDY ask for a picture of the top side of the head!

So I asked for a picture of the top of the heads will see if he takes them and sends it to me or posts it on Ebay.
Kevin

he had other sets on there , with pic of top , they say indy

I had a set of Canfield heads that looked very similar. Good quality!

He said he's going to get pics for me, I have a funny feeling there Pro Comp heads.
Kevin

Thats an Indy head. No need for more pictures.

What do they flow as delivered? My Indy/Canfield heads from Indy with their cnc job flowed 365cfm on the intake. The intake was 200cc's stock and 210cc's after Indy cnc'd them. Jeff@Modern opened up the bowls to 213cc's and got them up to 386cfm with his valve job. Indy advertised their Hi-flow heads with an oversize intake valve of 2.40" and 266cc intake port at over 400cfm. (the exact words were 480cfm reported)Dave