T&T results with 13 lbs boost

T&T results with 13 lbs boost - 10/26/13 06:27 PM

Previously i was running about 10 sometimes touching 11 lbs of boost at the top of third gear. Last night i tried 13lbs touching 14 at the top of third...

Leaving at 3200 rpms (5 lbs) and shifting at 6000 crossing at 6200: 1.42, 6.32 @ 108.8, 9.97 @ 133.3

I will get a boost controller to help with the launch....

Posted By: JD Dart

Re: T&T results with 13 lbs boost - 10/26/13 06:44 PM

wow

That should be the fastest Dakota in the 9's But wait it's not an R/T so doesn't count. But for me it does great job

Posted By: all spooled up

Re: T&T results with 13 lbs boost - 10/26/13 07:26 PM

great pass killer 60 foot for a turbo car or truck what does it weight

Posted By: Devilbrad

Re: T&T results with 13 lbs boost - 10/26/13 08:27 PM

Yowza! Nice dude!!

Posted By: mshred

Re: T&T results with 13 lbs boost - 10/26/13 09:39 PM

Awesome! Was it spinning off the line?

Posted By: MPerry

Re: T&T results with 13 lbs boost - 10/26/13 10:36 PM

You have any posts lingering of the build up? I'm really curious about turbos.

Posted By: gregsdart

Re: T&T results with 13 lbs boost - 10/27/13 02:18 AM

Nice ride, James!

Posted By: 67_Satellite

Re: T&T results with 13 lbs boost - 10/27/13 03:29 AM

I found a cheap 10" converter and a slightly larger cam for a winter upgrade. If I had your 60' I would be a happy MF'er. That would put me at 11.20's@ 121. Not gonna hold out hope for .7 sec. improvment,but it's gonna get better.

Posted By: Clanton

Re: T&T results with 13 lbs boost - 10/27/13 03:41 AM

That is COOL!

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/27/13 04:06 AM

Thanks guys!

I dont post as much here as i used too,but i still troll here!

With me in it, 3390 lbs

No spin on that pass but i tried 15 lbs of boost and blew the tires.

Its a 389 sb, home ported eddy heads, .520 hydraulic roller, M1 intake, FAST ignition, 76 mm turbo, 727, dana with 3.55 gears, 315 drag radials, ladder bars, magaflow muffs, ps, pb, ac, full interior.

Posted By: goldmember

Re: T&T results with 13 lbs boost - 10/27/13 04:33 AM

Are you running pump gas or E85? What fuel injectors are your using?

Posted By: 1967dartgt

Re: T&T results with 13 lbs boost - 10/27/13 12:15 PM

Congrats that was a nice pass. Nice having a nine sec street truck.

Posted By: tboomer

Re: T&T results with 13 lbs boost - 10/27/13 01:21 PM

Very nice James!!

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/27/13 02:18 PM

They are 83 lb injectors.

My goal when I started the build was a very streetable 10 second truck so I think I accomplished and exceeded that!

Thanks Ted!

Posted By: Devilbrad

Re: T&T results with 13 lbs boost - 10/27/13 03:21 PM

I would love to see some video!

Posted By: ProSport

Re: T&T results with 13 lbs boost - 10/27/13 03:54 PM

Quote:

94 Dakota, sb, 76mm turbo AC, PS, PB, full interior! 9.97 @ 133.33

^^^ That says it all, very cool!!

Can you post a photo of the engine?

Posted By: dizuster

Re: T&T results with 13 lbs boost - 10/27/13 07:06 PM

Very nice man! Gotta feel great to get that 9 sec slip!

Get a boost controller and a trans brake in that thing. It will make all the difference in the world for getting it down the track.

Posted By: I_bleed_MOPAR

Re: T&T results with 13 lbs boost - 10/27/13 07:19 PM

Congrats, TOD.

You've got that thing rollin'.

Tim

Posted By: RobX4406

Re: T&T results with 13 lbs boost - 10/27/13 07:22 PM

Nice running turbo truck!

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/28/13 01:41 AM

Here are a few pics...

Attached picture 7902979-InDriveway.jpg

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/28/13 01:43 AM

Motor..

I drive it on the street the same as I run it at the track.

Attached picture 7902983-MotorTop.jpg

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/28/13 01:44 AM

Inside...full cage but hidden well...

Attached picture 7902985-CageDriverSideSmall.jpg

Posted By: cheapstreetdustr

Re: T&T results with 13 lbs boost - 10/28/13 03:15 AM

what was the fastest you went in the challenger?

what is the rear suspension on the dakota?

Posted By: 416challenger

Re: T&T results with 13 lbs boost - 10/28/13 03:39 PM

Way to go James

That is really moving.

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/28/13 03:56 PM

Thanks Josh!

In the Chally, motor only I went 9.87 @ 137. Nitrous it went 9.28 @ 144

Rear is a ladder bar/coil over on drag radials.

Posted By: topfueldart

Re: T&T results with 13 lbs boost - 10/28/13 04:00 PM

Nice job James, you're basically right where I hope to be shortly.

Posted By: 70blackfish

Re: T&T results with 13 lbs boost - 10/28/13 05:17 PM

KOOL truck! i think i bought your challenger exhaust, 3.5 x pipe.

seems like a long time ago.....

Posted By: 70Cuda383

Re: T&T results with 13 lbs boost - 10/28/13 05:54 PM

Quote:

They are 83 lb injectors.

My goal when I started the build was a very streetable 10 second truck so I think I accomplished and exceeded that!

Thanks Ted!

I'll say! sounds like a very streetable NINE second truck!

Posted By: BradH

Re: T&T results with 13 lbs boost - 10/28/13 05:58 PM

Dayamn... Trucks iz UGLY, but that ET is beautiful!

Posted By: 1967dartgt

Re: T&T results with 13 lbs boost - 10/29/13 01:50 AM

What size is the motor?

Posted By: rdakota340

Re: T&T results with 13 lbs boost - 10/29/13 02:19 AM

You are getting it tuned in congrats on the new times!

Posted By: racerx

Re: T&T results with 13 lbs boost - 10/29/13 02:36 AM

Quote:

Thanks Josh!

In the Chally, motor only I went 9.87 @ 137. Nitrous it went 9.28 @ 144

Rear is a ladder bar/coil over on drag radials.

How big of a shot of the juice in the chally?

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 10/29/13 01:06 PM

Motor is a stroked 5.2 for 389 cid.

I ran 160 shot on the Chally. I couldn't get it to hook on a bigger shot.

Posted By: an8sec70cuda

Re: T&T results with 13 lbs boost - 10/29/13 02:06 PM

VERY nice James!!!

Posted By: voigtspeed

Re: T&T results with 13 lbs boost - 11/21/13 05:22 AM

Who,s turbo are you using? Any specs would be great.

Thanks jim

Posted By: 72demon416

Re: T&T results with 13 lbs boost - 11/21/13 06:16 AM

That's a very cool ride!!

Posted By: Crizila

Re: T&T results with 13 lbs boost - 11/21/13 03:31 PM

Quote:

Here are a few pics...

Awesome #'s James.

. I'm hoping to break 130 this year and maybe low 10's.

Posted By: Duner

Re: T&T results with 13 lbs boost - 11/21/13 03:45 PM

Awesome job!

That thing is officially flying!!!!!!

Posted By: BSB67

Re: T&T results with 13 lbs boost - 11/21/13 11:46 PM

That is so cool!

Posted By: FastmOp

Re: T&T results with 13 lbs boost - 11/22/13 04:51 AM

Nice pass! And nice Hot Rod to!

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 11/22/13 03:16 PM

Thanks guys! I wish I had an aftermarket block...

Posted By: Duner

Re: T&T results with 13 lbs boost - 11/22/13 03:29 PM

I've been hitting mine with 18.8 psi of boost and spinning it to 7,000 for quite some time on the stock block with factory caps and bolts and no fill. I'm betting you still have LOTS of room left to work with. I think the "myth" about how much these blocks can take is based on failed parts with bad tunes.

Posted By: dannysbee

Re: T&T results with 13 lbs boost - 11/22/13 03:51 PM

I agree. Look at a Windsor ford. Very weak looking compared to a 318-360 Mopar platform. Lots of after market blocks for the ford now but in the 80's and 90's lots of very fast stock blocks. As long as you keep a handle on the tune I think a turbo is easier on engine blocks and parts.

Posted By: Thumperdart

Re: T&T results with 13 lbs boost - 11/22/13 05:29 PM

You`ve really got that thing scootin for sure...............

Posted By: dizuster

Re: T&T results with 13 lbs boost - 11/23/13 03:20 PM

We'll see how good the stock block is in turbo form. I have some upgrades coming this winter that are really going to put it to the test in the spring.

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 11/24/13 12:59 AM

From a lot of things I have read, a turbo is not as hard on a motor as N/A or other forms of power adders.

Posted By: Randy..

Re: T&T results with 13 lbs boost - 09/24/15 04:47 AM

What Fast box are you running? And what RPM is it pulling thru the traps?

Posted By: 416challenger

Re: T&T results with 13 lbs boost - 09/24/15 05:05 AM

James that's awesome!

Posted By: dizuster

Re: T&T results with 13 lbs boost - 09/24/15 01:14 PM

Lol... This thread is from 2013

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 09/25/15 10:48 PM

haha, ya, but I haven't run the truck at the track since! I do plan on going in a few weeks to try out my fancy boost controller.

Josh: Thanks! Hope all is well for you there! I see your dad made the magazines!

Randy: I am running Classic FAST and pull 6,000-6100 through the traps.

Posted By: 383man

Re: T&T results with 13 lbs boost - 09/27/15 03:40 AM

Congrats on the new best as you have it running real good.

I always wonder just how much the boost makes it pick up ? I mean if you took the turbo off what do you think it would run ? I am just curious of about how much the turbo helps as it seems many of the fast turbo cars I see have engines that are not all that heavily built and are closer to stock then I thought. It does surprise me how well some of them hold up under boost. But you sure have it running good.

Ron

Posted By: TheOtherDodge

Re: T&T results with 13 lbs boost - 09/27/15 03:29 PM

I would guess the motor makes around 350 hp. 389 cubes, M1, home ported Eddy heads (2.02/1.62), .520 hydraulic roller cam (wide LSA with 220 duation), 9.4:1 compression.

With the tight converter and no gearing with tall tires (3.55, 30" tall) I would guess somewhere around low 12's.