Re: deck plate hone on a filled block... - 12/18/0803:17 AM
Carl, I have BHJ torque plates for both the B-RB and 426 Hemi(sold the SB one last year)and a lot of head gaskets, let me know if you want to use it. BTW, I hate filled blocks
Re: deck plate hone on a filled block... - 12/18/0804:54 PM
You have to remember that most of the thread engagement and resulting distortion is towards the top 1/2 of the bore. Blocks are not usually filled to the top, but it will affect it anyway.
It also wouldn't hurt to torque the main caps before honing with a plate also!
Posted By: Anonymous
Re: deck plate hone on a filled block... - 12/18/0805:06 PM
I even went a step further and torqued a head down as well as the mains while the block fill was seting up. Probably overkill
Re: deck plate hone on a filled block... - 12/18/0809:03 PM
If you have the time, patience and/or money, why not! I've heard of plates bolted on both side for setting up as well as honing. Even heard a rumor of someone running hot water through it!