Moparts

Spool from 489 rear to 742

Posted By: fasteddie

Spool from 489 rear to 742 - 08/05/13 12:42 AM

Did a search. No help. Can a Strange spool in a 489 housing be used in a 742 housing?

Thanks

Fasteddie

Posted By: 1KoolBee

Re: Spool from 489 rear to 742 - 08/05/13 12:47 AM

It should, I know the early and late Sure-Grips interchange.

Posted By: Locomotion

Re: Spool from 489 rear to 742 - 08/05/13 12:48 AM

Yes, spools and the spool bearings interchange. Just the pinions and their bearings are different along with yoke spline being either way (fine/course) on any of them..

Posted By: Cab_Burge

Re: Spool from 489 rear to 742 - 08/05/13 04:27 AM

Quote:

Yes, spools and the spool bearings interchange. Just the pinions and their bearings are different along with yoke spline being either way (fine/course) on any of them..

You have to use the carrier bearings and races for the 489 carriers on the spool

That makes it fit in all three cases, been there done that personnally on all three cases, 741,742 and the 489

Posted By: racerx

Re: Spool from 489 rear to 742 - 08/05/13 11:06 AM

Quote:

Quote:

Yes, spools and the spool bearings interchange. Just the pinions and their bearings are different along with yoke spline being either way (fine/course) on any of them..

You have to use the carrier bearings and races for the 489 carriers on the spool That makes it fit in all three cases, been there done that personnally on all three cases, 741,742 and the 489

Cab:what bount the inner bearing on the pinion?do that inner change with a carrier bearing/or should i ask if the inner bearing the same on all three pinions(741,742,489)Thax.....

Posted By: JohnRR

Re: Spool from 489 rear to 742 - 08/05/13 03:05 PM

Quote:

Quote:

Quote:

Yes, spools and the spool bearings interchange. Just the pinions and their bearings are different along with yoke spline being either way (fine/course) on any of them..

You have to use the carrier bearings and races for the 489 carriers on the spool That makes it fit in all three cases, been there done that personnally on all three cases, 741,742 and the 489

Cab:what bount the inner bearing on the pinion?do that inner change with a carrier bearing/or should i ask if the inner bearing the same on all three pinions(741,742,489)Thax.....

If you are asking about the pinion bearing that is under the head of the gear then no that is different between the 3 different cases .

Posted By: Cab_Burge

Re: Spool from 489 rear to 742 - 08/05/13 06:41 PM

The pinion bearings, both,front and raer, need to match the cases, not the spool or carier unit

Posted By: fasteddie

Re: Spool from 489 rear to 742 - 08/08/13 12:53 AM

Thanks all. I thought it would fit but wanted to ask before I took it apart.