Posted By: tuff440
440 Intake manifold gasket - 07/25/13 12:02 PM
Im putting together a 440 with rpm heads and a torker manifold. Which felpro intake gasket is better for my application, the common bath tub gasket or the embossed steel laminate version.
Posted By: JohnRR
Re: 440 Intake manifold gasket - 07/25/13 09:40 PM
embossed steel laminate for a big block mopar ???
If you don't use a bathtub type gasket you will need a valley cover.
Posted By: '72CudaRacer
Re: 440 Intake manifold gasket - 07/25/13 10:43 PM
Use Felpro 1215. It has the steel bath tub and 4 thin paper gaskets that go on either side of the steel.
Brian
Posted By: tuff440
Re: 440 Intake manifold gasket - 07/27/13 11:08 AM
I asked the question because the description for the 1215 said stock to mild applications and the steel laminate for more serious engines.
Posted By: tuff440
Re: 440 Intake manifold gasket - 07/28/13 02:43 PM
I got that part number mixed up. The FEMS96000 says its for stock to mild engines and the 1215 is the embossed steel laminate version which has the 4 paper gaskets Brian mentioned. They are both a bath tub design which look identical which is why I asked about the two different gaskets. I will buy the 1215. Out of curiosity, does anyone make a valley plate which works with e-heads.
Posted By: '72CudaRacer
Re: 440 Intake manifold gasket - 07/28/13 03:54 PM
Also, when you use the Felpro 1215, glue the gaskets to the steel part and let it dry before installing. If not, the gaskets will move around some when you install the intake.
Brian