SBM guys, what mods are you doing for dry sump?

Questions for the Small Block Mopar guys. What mods are you you guys doing or parts did you purchase for converting to a dry sump on stock type 360 Magnum block? Just looking for some ideas or tips on what to do or not to do. What are you guys doing on the intermediate distributor shaft when going to an external belt driven oil pump?

Quote:

---

Questions for the Small Block Mopar guys. What mods are you you guys doing or parts did you purchase for converting to a dry sump on stock type 360 Magnum block? Just looking for some ideas or tips on what to do or not to do. What are you guys doing on the intermediate distributor shaft when going to an external belt driven oil pump?

---

You can buy a dist thats made for a dry sump pump..
MP sells it also(but its a MSD dist).. I run a 4 stage
pump.. 2 suction lines in the pan and 1 in the intake
valley(R3 block with solid valley).. I also put a
divider wall in the pan at the #3 journal so each
suction line works better... other than that you just
do any normal oil mods you want depending on how high
you rev
EDIT
Also close off the oil port in the rear main in your case