Moparts

tranny or touque?

Posted By: 67valiant

tranny or touque? - 06/21/13 04:55 AM

kinda lost on this so i ask car sgifts fine when in burn out box but when i lauch its good shift into 2 rpm drops like maybe 500rpm then shift into drive drops like it should stall is a 5000 so tranny slip or convertor slippage? you can here it shift when i was videoed but in the box and going down the strip any ideas?
Posted By: rowin4

Re: tranny or touque? - 06/21/13 12:35 PM

So given the information given, what do you think should be happening? Why do you think some thing is slipping? Do you think the rpm's should stay the same , more drop,less drop? I don't know why I responded , never race with a a automatic.
Posted By: 67valiant

Re: tranny or touque? - 06/21/13 11:55 PM

you would think it would drop in rpm or am I missing something it drop when it hits 3rd but not a lot from 1-2
Posted By: cgall

Re: tranny or touque? - 06/22/13 12:01 AM

If it is revving too much in 2nd then your band is loose or worn out. Try tightening it up all the way and then backing off 2 turns.
Posted By: 67valiant

Re: tranny or touque? - 06/22/13 05:21 PM

i was wondering about that but now what band the low reverse or the one you can get to on the outside that one is high band if i recall
© 2024 Moparts Forums