mopar performance roller rocker question stage IV

im interested in buying a new old stock set of mopar performance "crane gold" roller rockers for my 440. there were 3 part numbers one was 1.5's the other 1.6'a and another number 1.5s but for stage 4 and 5 heads. will they work on stock heads? i believe the intake rocker adjuster is moved away from the port only. not the exh rocker

The Stage IV rockers will work on the other OEM 906/452/etc. castings, since those heads have plenty of room for the intake pushrods to be offset away from the port due to the way the heads are cast.

cool i hope my stealth heads have the same clearance..

Nope, because the Stealths are filled in where the OEM iron heads are wide open. Not likely to work w/o some MAJOR pushrod tunnel , I'd expect.