Posted By: 67mprfan
Need help drag shock rear a body - 03/21/13 03:31 AM
Hello everyone
do they make a shorter rear drag shock for a demon, my problem is i put on a comp eng shock part #247-2730 and it's to long when i attach it,....it sit bolt hole to hole collapsed looking for any other make that are shorter.......btw rear end is set up leaf link.........Thanks
Posted By: 1967dartgt
Re: Need help drag shock rear a body - 03/21/13 01:54 PM
I have a shorter afco on mine.
Posted By: 67mprfan
Re: Need help drag shock rear a body - 03/21/13 09:34 PM
I found a shorter Rancho for mine........
do you have a part #
Posted By: a493demon
Re: Need help drag shock rear a body - 03/21/13 10:06 PM
i have a set of calvet one's i'm going to be selling soon. brad
Posted By: deaks
Re: Need help drag shock rear a body - 03/21/13 11:12 PM
calvert does two different lengths for mopars, one for SS springs and one for caltracs.
Mick
Posted By: topfueldart
Re: Need help drag shock rear a body - 03/22/13 06:51 AM
3890 is LONG, like 24 inches extended I think with 9 inches of travel. I've been doing alot of shock research recently and my car (@15.5 inch ride height between shock mounts) needs a 3860 from Afco (6 inches travel, closer to 20" fully extended. They also make a 3870 which is in between the two.
You need to take measurements of your suspension at ride height, with weight in the driver seat, as well as full droop/extension, and go from there.
Posted By: CHAPPER
Re: Need help drag shock rear a body - 03/23/13 02:02 PM
Afco #3860 on my '68 Valiant w/ladder bars and coilovers. Double adjustable, 125# springs. Car is a little over 3300# with driver.
Posted By: 67mprfan
Re: Need help drag shock rear a body - 03/25/13 12:38 AM
I've heard don't know how true but you can run a shock off of a 3/4 pick up truck with some sucess( staying on a budget)