Posted By: tboomer
Machinist's ink and pics for 493 Fart - 03/02/13 11:15 PM
What is the best way to remove this ink? Thanks!! Ted 
Machinist's ink and pics for 493 Fart
Posted By: tboomer
Re: Machinist's ink - 03/02/13 11:17 PM
#2....... 
Posted By: WO23Coronet
Re: Machinist's ink - 03/02/13 11:24 PM
If memory serves me right they make stuff to remove machinists ink, but brake cleaner will work as well
Posted By: tboomer
Re: Machinist's ink - 03/02/13 11:31 PM
Thanks!! 
Posted By: tubtar
Re: Machinist's ink - 03/02/13 11:46 PM
Dykem remover is the stuff , though most any volatile solvent ought to do the trick i.e naptha . lacquer thinner etc.
http://www.amazon.com/Dykem-82638-Remover-Cleaner/dp/B000E2FH48
http://www.amazon.com/Dykem-82638-Remover-Cleaner/dp/B000E2FH48
Posted By: Shoozy
Re: Machinist's ink - 03/03/13 12:14 AM
I always just used lacquer thinner
Posted By: Thumperdart
Re: Machinist's ink - 03/03/13 12:31 AM
Quote:THE best cleaner and final prep liquid on the planet in my opinion............
I always just used lacquer thinner
Posted By: tboomer
Re: Machinist's ink - 03/03/13 12:35 AM
Thanks,guys! I may have some thinner here.. 
Posted By: CHAPPER
Re: Machinist's ink - 03/03/13 01:25 AM
OKAY...this wasn't REALLY a question to find out how to get the dye off,,was it? You just wanted everybody to see the head work. 
That's OK...we understand.
That's OK...we understand.
Posted By: tboomer
Re: Machinist's ink - 03/03/13 01:28 AM
They came out pretty good,Rusty! 
Posted By: sixpackgut
Re: Machinist's ink - 03/03/13 04:00 AM
nice, who's artwork? what head is that?
Posted By: tboomer
Re: Machinist's ink - 03/03/13 04:37 AM
Victor MW ported by Radar Lechtenberg at R&J Performance..Thanks,Ray!
Posted By: dakotawilly
Re: Machinist's ink - 03/03/13 05:15 AM
also,,,,if you set it atop a cheby engine,the tears from the cheby engine will miraculously wash it away.....they cry a lot when mopars are around.....
Posted By: pittsburghracer
Re: Machinist's ink - 03/03/13 06:12 AM
Ok they are home and they are paid for. That's the hard part of the job so lets get them installed and go put a whoppin on somebody. 
Posted By: tboomer
Re: Machinist's ink - 03/03/13 11:49 AM
John...Now I have to save for the other stuff! They were bought and I paid for the work up front. Learned a lesson there. I have a feeling that someone is going to start saving up for a nitrous kit!! 
Posted By: pittsburghracer
Re: Machinist's ink - 03/03/13 12:55 PM
Quote:
John...Now I have to save for the other stuff! They were bought and I paid for the work up front. Learned a lesson there. I have a feeling that someone is going to start saving up for a nitrous kit!!
You know how I fill about that.
Posted By: tboomer
Re: Machinist's ink - 03/03/13 01:10 PM
Probably have to have Jimmy put some sissy bars on it,too!
Posted By: rook440
Re: Machinist's ink and pics for 493 Fart - 03/03/13 09:53 PM
you should have made Radar clean em up ....lol
Posted By: 493_DART
Re: Machinist's ink and pics for 493 Fart - 03/03/13 10:21 PM
........./
Posted By: 69B3GT
Re: Machinist's ink and pics for 493 Fart - 03/03/13 11:26 PM
Quote:
........./
Thats a cute system there....
Posted By: tboomer
Re: Machinist's ink and pics for 493 Fart - 03/04/13 01:36 PM
Quote:Thats kind of a "little one" isn't it Kevin???
Thats a cute system there....
Posted By: 74yellowduster
Re: Machinist's ink - 03/04/13 01:37 PM
Quote:
also,,,,if you set it atop a cheby engine,the tears from the cheby engine will miraculously wash it away.....they cry a lot when mopars are around.....
lmao
Posted By: 493_DART
Re: Machinist's ink and pics for 493 Fart - 03/05/13 04:50 AM
it might be little but it packs a punch and i know how to use it !!
Posted By: tboomer
Re: Machinist's ink and pics for 493 Fart - 03/05/13 12:58 PM
Quote:
it might be little but it packs a punch and i know how to use it !!
Tell ya what,Longhair..This spring,go make some test hits beside Jim Van Zee...That will tell you about what mine will do...
Posted By: deaks
Re: Machinist's ink and pics for 493 Fart - 03/05/13 01:55 PM
Nice heads Ted
Sell the old heads to pay for the parts you need.
Mick
Sell the old heads to pay for the parts you need.
Mick
Posted By: tboomer
Re: Machinist's ink and pics for 493 Fart - 03/05/13 02:00 PM
Thank you,Mick! To be honest,I almost sold the new ones! Then I came to my sences and won't let that orange pumpkin even get close to me!! I will sell my old ones later...
Posted By: smokinwoody
Re: Machinist's ink and pics for 493 Fart - 03/05/13 02:43 PM
they look great Ted....dye cleaner...LMAO
funny how some took the bait...
funny how some took the bait...
Posted By: pittsburghracer
Re: Machinist's ink and pics for 493 Fart - 03/05/13 04:09 PM
Quote:
they look great Ted....dye cleaner...LMAO
funny how some took the bait...
That Ted a sneaky one. Instigating trouble all the time. I think he needs a Moparts vacation.
Posted By: tboomer
Re: Machinist's ink and pics for 493 Fart - 03/05/13 06:07 PM
Quote:Ain't you got a manifold or something to work on??
That Ted a sneaky one. Instigating trouble all the time. I think he needs a Moparts vacation.
Posted By: pittsburghracer
Re: Machinist's ink and pics for 493 Fart - 03/05/13 06:09 PM
Quote:
Quote:Ain't you got a manifold or something to work on??
That Ted a sneaky one. Instigating trouble all the time. I think he needs a Moparts vacation.
