TTI 1-7/8 SB headers...who to buy from???

Posted By: mshred

TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 04:00 AM

As the title says, looking to get a set of the TTI 1-7/8 SB headers for an a-body, but am wondering who has the best prices on these? Should I order them directly from TTI or somewhere else?

Thanks!

Posted By: mopar dave

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 05:11 AM

if your looking for a header that makes power,i think the hedman husler race header is the best you'll do. TTI fit better. Ryan J once dyno tested these two headers and he claimed the hedman to make 50 more hp.

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 05:16 AM

Quote:

if your looking for a header that makes power,i think the hedman husler race header is the best you'll do. TTI fit better. Ryan J once dyno tested these two headers and he claimed the hedman to make 50 more hp.

I have decided the TTI's will be the header I run...looked into a couple of other different headers, and for what I do with the car, these would suit me best.

Posted By: Triple Threat

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 05:36 AM

I believe TTI sets prices for all distributors, so its the same no matter where you get them.

Posted By: J_BODY

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 06:13 AM

If you needed some for a W5 head boy would I have a deal for you!

Posted By: Voluster

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 04:23 PM

I bought mine right from TTI

Posted By: Streetwize

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 04:46 PM

Sam at TTI is an awesome person to deal with.

I tried to figure out a way to make the B body 1 7/8 Small block headers work in the Rocky (one side will fit but the pass side would need 2 altered tubes) and sam sent me a bunch of pics he took in order for me to get comparative measurements off of their mocked-up Chassis/engine combo Jigs.

Can't ask for a nicer more helpful crew than the guys at TTI!

Posted By: Aspen7695

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 04:53 PM

I got mine from Bob Mazzolini Racing in Riverside CA.

Raul

Posted By: mopar dave

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/17/13 04:59 PM

got my TTI's from Compuflow. know $100 off.

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 12:34 AM

Quote:

I believe TTI sets prices for all distributors, so its the same no matter where you get them.

well that makes it simple then

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 12:34 AM

Quote:

If you needed some for a W5 head boy would I have a deal for you!

Knowing my luck, I will buy a set brand spankin new, then a set of the exact same will show up in the classifieds right after for a smokin deal...seems to happen to me with every single part I buy

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 12:35 AM

Quote:

got my TTI's from Compuflow. know $100 off.

They are $100 off currently? or when you bought them?

If I can't find a dealer with a special on them, I will just buy direct...they seem like a nice bunch over there from what you guys are saying

Posted By: Quicktree

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 12:35 AM

Todd at MARSH performance.

Posted By: mopar dave

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 05:34 AM

when I bought them. 1 7/8 are available with 3" and 3 1/2" collector.

Posted By: MattW

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 01:14 PM

Quote:

As the title says, looking to get a set of the TTI 1-7/8 SB headers for an a-body, but am wondering who has the best prices on these? Should I order them directly from TTI or somewhere else?

Thanks!

Just remember if your ordering from California there will be shipping charges.
The last time I was looking at a catalytic converter for my truck and it was something like 100.00 + for shipping.
I have a set of tti 17/8 for a body but I think it has the 3 inch collector.
I wonder how much gain is going to the 31/2 collector?
Anyways they have 11 dyno runs on them.

Posted By: J_BODY

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 02:26 PM

We kept the W5 headers around as we had noted that the new Ebrock small block head was supposed to use the W5 exhaust pattern....but plans have changed so now I have more $600 wall art.... Hopefully the Ebrock head will finally appear, maybe it will open up a market for my headers. I will say, they fit great! Easy to bolt up, good spark plug access.

Posted By: mopar dave

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 03:27 PM

the headers that Ryan dyno'ed TTI had 3" collector and the husler had 3 1/2" collector.
I have the 1 7/8 TTI with the 3" collector and I think the collector is alittle short for making power. also when looking up inside the collector I notice where the 4 tubes come together,their all different lengths. any other header collector i'v looked in have all been same length.

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 03:58 PM

Quote:

Quote:

As the title says, looking to get a set of the TTI 1-7/8 SB headers for an a-body, but am wondering who has the best prices on these? Should I order them directly from TTI or somewhere else?

Thanks!

Just remember if your ordering from California there will be shipping charges.
The last time I was looking at a catalytic converter for my truck and it was something like 100.00 + for shipping.
I have a set of tti 17/8 for a body but I think it has the 3 inch collector.
I wonder how much gain is going to the 31/2 collector?
Anyways they have 11 dyno runs on them.

Matt, if you are interested in selling them pm me please

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 04:01 PM

Quote:

the headers that Ryan dyno'ed TTI had 3" collector and the husler had 3 1/2" collector.
I have the 1 7/8 TTI with the 3" collector and I think the collector is alittle short for making power. also when looking up inside the collector I notice where the 4 tubes come together,their all different lengths. any other header collector i'v looked in have all been same length.

From the website it looks like they only come with 3.5" collectors now...I am only running a 3" exhaust though, so I would have to get an adapter to neck them down to fit everything else.

how long ago did you buy yours?

Posted By: mshred

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 04:02 PM

Quote:

We kept the W5 headers around as we had noted that the new Ebrock small block head was supposed to use the W5 exhaust pattern....but plans have changed so now I have more $600 wall art.... Hopefully the Ebrock head will finally appear, maybe it will open up a market for my headers. I will say, they fit great! Easy to bolt up, good spark plug access.

yea, im wondering if those heads will ever be released myself or if they will just stay as a mythical prototype piece

anyways, thanks for all the shop recommendations guys! I have emailed a few of them

Posted By: justinp61

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 04:08 PM

Quote:

they only come with 3.5" collectors now...I am only running a 3" exhaust though, so I would have to get an adapter to neck them down to fit everything else.

I used these http://www.summitracing.com/parts/sch-3035/overview/.

Posted By: Triple Threat

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 05:03 PM

I'd definitely go 3.5" instead of 3" if given the choice. Gives you room to grow.

Posted By: 383man

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 05:08 PM

Bought my bigblock TTI's from Mancini. Ron

Posted By: MattW

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 05:35 PM

Quote:

Quote:

the headers that Ryan dyno'ed TTI had 3" collector and the husler had 3 1/2" collector.
I have the 1 7/8 TTI with the 3" collector and I think the collector is alittle short for making power. also when looking up inside the collector I notice where the 4 tubes come together,their all different lengths. any other header collector i'v looked in have all been same length.

From the website it looks like they only come with 3.5" collectors now...I am only running a 3" exhaust though, so I would have to get an adapter to neck them down to fit everything else.

how long ago did you buy yours?

Just looked at the tti web page and it looks like the 3 1/2 collector is only available in the standard exhaust port.

Posted By: MattW

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 05:50 PM

Quote:

Quote:

Quote:

the headers that Ryan dyno'ed TTI had 3" collector and the husler had 3 1/2" collector.
I have the 1 7/8 TTI with the 3" collector and I think the collector is alittle short for making power. also when looking up inside the collector I notice where the 4 tubes come together,their all different lengths. any other header collector i'v looked in have all been same length.

From the website it looks like they only come with 3.5" collectors now...I am only running a 3" exhaust though, so I would have to get an adapter to neck them down to fit everything else.

how long ago did you buy yours?

Just looked at the tti web page and it looks like the 3 1/2 collector is only available in the standard exhaust port.

Just got off the phone with TTI for 50.00 they will add a 3 1/2 collector to the W2 and W5 headers.

Posted By: justinp61

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 06:26 PM

Quote:

Just got off the phone with TTI for 50.00 they will add a 3 1/2 collector to the W2 and W5 headers.

It would be money well spent IMO.

Posted By: mopar dave

Re: TTI 1-7/8 SB headers...who to buy from??? - 01/18/13 06:52 PM

I cut my 3" collector off and added a 3 1/2"merge collector. haven't seen any real improvement,but I can say if you add 3" pipe after the 3 1/2" collector you may lose alittle in the 1/4. I loss 1 mph doing so. I now run 3 1/2" pipe.