Posted By: W5DART66
Quote:
How did the Turbo engine like the cast intake with the Wilson elbow? How is the flow per cyc ?
Quote:
What are the oil lines coming from the oil pan for? We have a wilson elbow with a cast indy intake, works just fine. Have been running it for five years now, have been in hte dyno once nad it made 1580 hp at 6100 rpm but the turbos were already out of their range at that point.
Quote:
just asking, because of a post on the turbo forums about the throttle body causing more flow to be fed to the back cylinders than to the front ....
Quote:Quote:
just asking, because of a post on the turbo forums about the throttle body causing more flow to be fed to the back cylinders than to the front ....
being a dry intake really mutes that point.....
Quote:Quote:
What are the oil lines coming from the oil pan for? We have a wilson elbow with a cast indy intake, works just fine. Have been running it for five years now, have been in hte dyno once nad it made 1580 hp at 6100 rpm but the turbos were already out of their range at that point.
Return lines for oil.
Quote:
The only time oil is level is when the pump isnt whipping it around the engine.
Quote:
How did the Turbo engine like the cast intake with the Wilson elbow? How is the flow per cyc ?