Any good video audio on a 440 with .590 cam?

I'd like to hear the 590 cam in a 440. YouTube doesn't have much too look at
Any links of your cars?

On Youtube search:

dyno motor outside.mov

looney dyno day

Both are vids of my 915 iron head, flat top piston 440 w/ the Mopar 590 cam being dynoed at Dave Bruns shop.. (Mid America Racing Engines- Washington Iowa)

What were the dyno numbers?

I have a few on u tube that you can see. Hope this works...

http://www.youtube.com/watch?v=fT-8H6rKDE4&feature=player_detailpage

Brian Dunnigan

That is the final round about midnight. lighting and video not the best, but the sound is ok.

Brian Dunnigan

First one worked ok, I'll try another.
http://www.youtube.com/watch?v=91AnSxZzgpw&feature=player_detailpage

From a ways back, but other than a mustang running in the background, not too bad.

Brian Dunnigan

74Duster383-

11.25 Compression, Heads flow 268/207
850 Carb M1 Intake

Motor dynoed [Email]560hp@6200[/Email], 520 Ft/lbs@5100

Awesome! Brian your car is one of my fav's on here! Killer!

I found this clip of a nostalgia event last year, i was suprised to see my junk at 1.30 in, 1st run off the trailer, ran 10.23.
Mick

http://vimeo.com/52627119

http://www.youtube.com/watch?v=sIl-88xIsQw

Stupid vibrating camera mount!
http://www.youtube.com/watch?v=9G8N3yxrQBQ

http://www.youtube.com/watch?v=_19Or0ZTu...mp;feature=plcp

http://www.youtube.com/watch?v=bofRAgenYrc&feature=youtube_gdata_player

Not a 440 but a 451(400)
Before the mono springs

What did it run there and did you go quicker with the monos ?
Mick

dang it clovis! your killin me... lol i went through your videos again and seeing your car makes me want the hedmans again! (who needs a nice set of coated pro parts? lol) man it looks great and the "in garage" audio is awesome! deaks yours looked great in that video! where was that? uk?

It was at a track just outside of stratford on avon, the birth place of william shakespeare. The strip is named after him.
Mick

GS, Nice running Charger and vids. Whats the rest of your combo. Do you know where your cam is centerlined at.

It went 9.92/134 there. The monos like many others have said , make the car 60 ft a little better but a lot more consistent.

I just got back from the track and it went 1.409/1.411/1.390/1.384
Those ended with a 9.926/9.925/9.865/9.860
MPH 133.55/134.04/134.59/135.00

The last pass was a new best 9.86/135 and 6.25/110 in the 1/8th.

Quote:

---

GS, Nice running Charger and vids. Whats the rest of your combo. Do you know where your cam is centerlined at.

---

CL is 107 or 108 if I remember correctly. I was struggling to find the correct offset key to get it closer to 106... back in 1993 when I put the engine together.

Combo is a 30-over stock stroke 440. Unported open chamber EB Performers, M1-4500 intake, 9377 I picked up on Ebay cheap, TRW pistons, stock rods, and a 150 hp Cheater Plate.