Posted By: DusterDave
Quick question on harmonic damper installation - 10/28/12 04:43 PM
I'm in the middle of installing an aftermarket damper on my 318 stroker, and I've never installed one on smallblocks before. Is there a precise stop on the crank snout, or do I have to check pulley alignment as I go?
Posted By: rickraw
Re: Quick question on harmonic damper installation - 10/28/12 04:51 PM
it will stop against the crank gear. u might hone the damper a little. some have too much interference fit. may gauld on the crank snout. use some antiseize on the snout.
Posted By: Hot 340
Re: Quick question on harmonic damper installation - 10/28/12 08:09 PM
Damper fit should be checked while degreeing the cam.. just to check accuracy of timing marks on true TDC.
Makes it a lil easier.
