Moparts
chassis table/jig
Posted By:
DemonDust
chassis table/jig -
10/27/12
03:45 PM
How have you guys built your tables/jigs? What materials did you use? Things you would change if you built one again.
Posted By:
TrWaters
Re: chassis table/jig -
10/27/12
08:47 PM
Probably a little overkill, but I bought and modified an old Bear alignment rack. I cut off about 2 feet where the turn tables set. Is now 14 feet long. The width is adjustable.
Posted By:
TrWaters
Re: chassis table/jig -
10/27/12
08:54 PM
This was my economy table. Made out of 2x12 spruce. Screwed together for easy disassembly.
Posted By:
magnumcharger
Re: chassis table/jig -
10/28/12
01:39 AM
I'm building one right now.
Here's a link to the album:
https://www.facebook.com/#!/media/set/?set=a.10150841209841314.398282.565066313&type=3
Of course you'll need a Facebook account to see it.
© 2024
Moparts Forums