sb valve spring

looking to find a set of springs that are 200 on the seat 500 min installed that have a dia of 1.50 or lower to clear my crane gold roller rockers my head guys say i need that pressure for my billet solid roller cam sounds high dont ya think as i look at other cams for springs

Doesn't sound high for a solid roller. Mine are 240 @ 1.900 and 598 @ 1.15"
Comp 943-16's
I guess it would depend on the profile , but those numbers you want are near the bottom of the scale with solid roller cams.
Your installed height would be helpful.
I wouldn't look to save money here though.......expect to drop somewhere around three bills for quality.

yup going with good stuff just need them to clear the rockers we were looking at the comp 938 204&1.90 516&1.25 as they are 1.539 od but there still a lil close he says

I ran the comp 938 speings with a solid roller and my cam was 640 lift 265@.050 worked well.

opps ya my cam profile is 600 lift 268@50

personalty I would want more spring than that on a solid roller.

These are close to what you are looking for, with a 1.85 installed height (197 seat and 533 open @ 0.600 lift).

http://www.summitracing.com/parts/LUN-73899LUN/

200 on the seat is not very much with a solid roller.......... 240 250 would be nice...

I asked Chaz Knight about running my Crane Golds with the solid roller. I was about 700 open pressure and he told me the rockers were not recommended for over 600 open pressure, So I just got HS rockers instead but I still went down on the open pressure to about 645. Personally I think you need more spring pressure than 500 and a better rocker arm. I know, sucked for me too.

thanks for you help guys ya im looking into t&d rocker go big or go home right just where to buy them now

Competition Products is a stocking dealer , though they probably won't have MoPar in stock. But their prices were pretty friendly.
www.competitionproducts.com
I got mine through them and the price was the lowest I found anywhere , even having to order the parts. Pretty quick turn around too.....a week as I recall.
I don't know what to tell you about the duty for international orders , but I do have some theories as to how to minimize it.
I have a handful of friends up there and any transaction can be a challenge.