Posted By: StrokerAspen
1968 Super Stock Seat Brackets - 02/25/12 07:08 PM
Hey everyone,
My material will be showing up next week to cut these seat brackets out. My price is going to be $150.00+shipping as I stated I would shoot for in a previous thread. They will be made from .100" Aluminum as were the originals, and they are built to original spec. I have made some small changes to aid in the welding process, and to insure the gussets are exactly where they are supposed to be.
I will be making a limited quantity on the first run as I am only doing one sheet, and it will have 4-5 sets of the 68 seat brackets, and 4-5 sets of the 64-5 seat brackets. First 4 people to send me the money will be the first to get the first run. If there is a demand for double that, I will make double and so on. Turn around shouldn't be a issue.
the list I have on interested people from Moparts is as follows:
68shifter (Paid)
scatpacktom
mikeysmopars
I do have more interested from another site as well. Thanks guys!
-Kenny
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 02/25/12 07:21 PM
I will post pictures today
Payment can be made through Paypal, or through credit card. We can figure out shipping before payment is made if you PM me your address, OR email me at
kjconcepts@hotmail.ca-Kenny
Posted By: Troy
Re: 1968 Super Stock Seat Brackets - 02/26/12 07:27 AM
You might want to offer them with no mounting bolt holes. There are two or three bolt pattern when it come to the A100 seats and depending where you mount them in the body, those holes will not line up either. When I got my brackets I wish they did not have the the holes in them.
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 03/01/12 05:32 PM
Just an update, material should come in the door today, and with any luck, the flat piece will be cut next week. I did order a second sheet, so there is still room for more! Thanks guys.
-Kenny
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 03/20/12 07:35 PM
The brackets are cut and bent up! There is still 3-4 68 sets up for grabs. The 64-65 brackets all sold. Here are two of the 64-65 brackets ready to be welded.
-Kenny
Posted By: 68shifter
Re: 1968 Super Stock Seat Brackets - 03/20/12 08:04 PM
Man those are looking good!
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 03/20/12 09:19 PM
Yeah, I haven't seen them in person yet, but I will in a couple hours before the welding begins! Can't wait!
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 03/21/12 03:53 AM
Did you buy from me or Curleysracecars?? I don't have my paper work in front of me right now.
Posted By: jkwedge540
Re: 1968 Super Stock Seat Brackets - 03/21/12 10:21 PM
looking for some for a 69 b body. can you make them?
Posted By: Hemi SS
Re: 1968 Super Stock Seat Brackets - 03/21/12 10:54 PM
I just sent you a email about the 68 Super Stock sets.
Posted By: scatpacktom
Re: 1968 Super Stock Seat Brackets - 03/22/12 02:32 AM
They look good so far
Was wondering how you were making out.
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 04/03/12 02:50 AM
Just packaging up the first batch!! Woooo Hooooo!
-Kenny
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 04/04/12 04:45 PM
Posted By: Hemi SS
Re: 1968 Super Stock Seat Brackets - 04/12/12 09:28 PM
Hi Kenny,
Just opened the box with the SS seat brackets you made me. They look great! Thanks.
Posted By: wally426ci
Re: 1968 Super Stock Seat Brackets - 05/16/12 11:46 AM
This is great news. I can't wait to see them installed. I hope you plan on more runs in the future. I am not quite at that point of my build.
Posted By: snook
Re: 1968 Super Stock Seat Brackets - 06/09/12 01:11 AM
Can't wait to see mine, these one off 62-65 buckets are their new home:
Posted By: snook
Re: 1968 Super Stock Seat Brackets - 06/12/12 01:25 AM
BUMP. I hear that the second batch is ready to hatch.
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 06/12/12 03:51 AM
Getting closer! The Laser shop I use is jacking me around on pricing, so this run might be water jet cut in house. I will keep ya posted!
-Kenny
Posted By: snook
Re: 1968 Super Stock Seat Brackets - 07/05/12 04:03 PM
ryangtogtx, I don't have the brackets yet, so no installed seat pics. Is that what you were wondering or are you still waiting on your brackets? Been a few months now, wasn't expecting it to take this long.
Chuck
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 07/05/12 05:06 PM
Hey, Sorry guys. I have run into issues with my cutting supplier. I have two other suppliers finishing up quotes this week. Sorry for the delay.
-Kenny
Posted By: StrokerAspen
Re: 1968 Super Stock Seat Brackets - 07/05/12 07:16 PM
I was just taking with our shop foreman at the fab shop I work at. Sounds like he might be able to cut me a deal on waterjet cutting these which would work out well since my material is sitting in our shop currently.
-Kenny
Posted By: three30chris
Re: 1968 Super Stock Seat Brackets - 03/29/15 05:17 AM
Hello do have any of the 64 65 seat brackets for sale? Thanks Chris
Posted By: OSDart
Re: 1968 Super Stock Seat Brackets - 07/27/15 03:43 AM
X2- Do you have any seat brackets for a 65' Belvedere?
Thanks
