Posted By: turner
Nitrous kit questions - 02/05/12 02:20 PM
I will be adding NOS to my car this year and have a few questions on wich kit to buy and how the system will be triggered. My car is a 67 Barracuda that runs 11 teens with a 440/cnc ported eddy heads, .580 lift cam, 900cfm carb and a 3500 Coan convertor. I currently launch off a two step at 2300 rpms, then at release of my two step, WOT will occur and my NOS will then be activated, is what I am assuming will occur. I was intending on running my trigger wire for power ON to the system through a low fuel pressure switch, so that if I have no fuel pressure my system will not work, does this sound like the correct way to install and will this come in the kit or do I have purchase this extra? I plan to add a Holley blue pump to supply fuel for the NOS system, I currently run a Holley billet black pump for the engine now.My current pump is key activated because of the street driving, but I intend to put a switch in for the blue pump....or should the main NOS ON/OFF switch be used? I built the engine with a 150 shot of NOS in mind, wich kit should I purchase? I dont think I would want to be shooting more than a 200 shot, wich of the kits and sylenoids will suit me best?