Moparts

EFI Kit For Blower ?

Posted By: WOTcuda

EFI Kit For Blower ? - 01/25/12 11:01 PM

Does Any One Have Suggestions For Running Two EfI Instead Of Carbs On 360 W/Blower?
Posted By: 00snake530

Re: EFI Kit For Blower ? - 01/25/12 11:12 PM

Check out FAST EFI, they have a 2 X 4 kit

http://www.fuelairspark.com/ezefi/default.asp
Posted By: Mopar_Rich

Re: EFI Kit For Blower ? - 01/26/12 12:40 AM

The dual throttle body EZ system from FAST does not support boosted engines. But the FAST self learning XFI 2.0 would be a perfect fit. But you'd need a laptop for setting the basic parameters .
Posted By: 00snake530

Re: EFI Kit For Blower ? - 01/26/12 12:47 AM

Quote:

The dual throttle body EZ system from FAST does not support boosted engines. But the FAST self learning XFI 2.0 would be a perfect fit. But you'd need a laptop for setting the basic parameters .




Good call, 1 bar map on the ez system
Posted By: VZCharger

Re: EFI Kit For Blower ? - 01/26/12 01:02 AM

Throttle bodies? What are those?


Attached picture 7036989-itsin-post.jpg
Posted By: Dragula

Re: EFI Kit For Blower ? - 01/26/12 03:11 AM

The bug catcher set-up with FAST XFI or FAST Classic efi works well in either blown or unblown modes....

Posted By: Cab_Burge

Re: EFI Kit For Blower ? - 01/26/12 07:05 PM

I see no reason you couln't run dual dry throttle bodys with one TPS or a MAP sensor Anyone else, Rich?
Posted By: bigtimeauto

Re: EFI Kit For Blower ? - 01/26/12 07:15 PM

I don't think the fast ez kit has fueling or timing maps for the engine under boost. (never saw it just guessing)

I'm sure with enough tinkering you could get it to work but by then just buy the correct box and have at it.
Posted By: kick_the_reverb

Re: EFI Kit For Blower ? - 01/26/12 09:05 PM

I was thinking of getting just the hardware from the Dual TB EZ EFI, and then using a different ECU to run it.
I heard that the bug catcher type of setups get touchy for street driving.

Ran
Posted By: Dragula

Re: EFI Kit For Blower ? - 01/26/12 09:22 PM

Quote:

I was thinking of getting just the hardware from the Dual TB EZ EFI, and then using a different ECU to run it.
I heard that the bug catcher type of setups get touchy for street driving.

Ran




Yes they are. When you consider the surface area exposed vs. the amount of throttle imput between them, yes touchy, but for the street, I restrict the fuel a little and it calms it down. I have two programs, one for racing, and one for street driving. Especially if you uncork it for racing!
Posted By: WOTcuda

Re: EFI Kit For Blower ? - 01/26/12 10:14 PM

Thanks Guys . I'll Make Some Phone Calls . Was Hopeing For A Self Controlled unit That would Adjust itself . I'LL Do Some More Checking.
Posted By: Cab_Burge

Re: EFI Kit For Blower ? - 01/27/12 12:25 AM

Quote:

Thanks Guys . I'll Make Some Phone Calls . Was Hopeing For A Self Controlled unit That would Adjust itself . I'LL Do Some More Checking.


Sounds like it is time for Big Stuff Three I bought some parts on here(dual 4150 throttle bodys) recently for a Rons mechanical methanol fuel injection based on wanting to convert it to use with E85, no EFI on it. I'm thinking, hoping, you can mix and blend some parts like the dry throttle bodies with some EFI parts, like the injectors,fuel rails, MAP, TPS, main controller(brain) and so on we will see, Rons wanted over $900.00 to convert the pump and injectors and add two primers for it to start on gasoiline I already have some 80 lb EFI injectors that came with those parts so maybe it is time to convert and stop fighting progress
Posted By: Mopar_Rich

Re: EFI Kit For Blower ? - 01/27/12 02:28 AM

Quote:

Thanks Guys . I'll Make Some Phone Calls . Was Hopeing For A Self Controlled unit That would Adjust itself . I'LL Do Some More Checking.




The XFI 2.0 is self tuning so it does adjust itself, but you still need a laptop to set things such as idle AF, timing, target AF under boost etc., that are not part of the self adjustments. Dual throttle bodies and the XFI (or Big Stuff) is really what you need.
Posted By: WOTcuda

Re: EFI Kit For Blower ? - 01/27/12 05:48 PM

DO They Have A Web Site For (Big Stuff ) W/Technical Help?
© 2024 Moparts Forums