Posted By: ppmracing
383cu stroker pistone ? - 01/15/12 11:06 PM
What brand has piston in stock for a 383cu block, .030" , 4,150 stroke, 6,760 rods
Thanks.
Thanks.
383cu stroker pistone ?
Posted By: JohnRR
Re: 383cu stroker pistone ? - 01/16/12 12:27 AM
I don't think anyone , 383 pistons for a stroker are few and far between , the standard piston CH for the 383 stroker is a 1.320 ch , it works with a 3.75 stroke , 3.91 stroke and 4.25 stroke.
I assume you already have the crank and rods ? If not then now is the time to change , I have a set of new diamond 1.320 .030 383 pistons that I'm going to sell ...
I assume you already have the crank and rods ? If not then now is the time to change , I have a set of new diamond 1.320 .030 383 pistons that I'm going to sell ...
Posted By: Dodgem
Re: 383cu stroker pistone ? - 01/17/12 01:21 AM
Well they sell the kits for 383 now so pistons are available.
Mancini's sells the 383 stroker kits so they have access to the pitons call wes!
Mancini's sells the 383 stroker kits so they have access to the pitons call wes!
Posted By: Dean_Kuzluzski
Re: 383cu stroker pistone ? - 01/17/12 01:31 AM
MuscleMotors offers 2 stroker kits too.
They dropped the 431 (3.75 crank) kit altogether but you could probably talk them into one.
http://www.musclemotorsracing.com/stroker-category.html
They dropped the 431 (3.75 crank) kit altogether but you could probably talk them into one.
http://www.musclemotorsracing.com/stroker-category.html
Posted By: ppmracing
Re: 383cu stroker pistone ? - 01/17/12 10:03 AM
Cant see that this company have it for 4,15 crank and 6,760 rods ??
Wery strange to me , this is a good combo ,,
Wery strange to me , this is a good combo ,,
Posted By: Defbob
Re: 383cu stroker pistone ? - 01/17/12 01:58 PM
440source has them
Posted By: ppmracing
Re: 383cu stroker pistone ? - 01/17/12 04:02 PM
dont think so ,,,,with 1,12 comp height and 4,280 bore ??????????
I have to go custome made ,,
I have to go custome made ,,
Posted By: JohnRR
Re: 383cu stroker pistone ? - 01/17/12 05:18 PM
Quote:
dont think so ,,,,with 1,12 comp height and 4,280 bore ??????????
I have to go custome made ,,
That is your choice, the 4.150 stroke has fallen out of favor. The 1.320 compression height piston fits many differnt stroke lengths .
Posted By: ppmracing
Re: 383cu stroker pistone ? - 01/17/12 05:46 PM
This is the same comp height when we ran with the 400 block,,,,and i dont think this has fallen out off favor ??? Same stroke,, same rod,, onley different bore size.
Posted By: JohnRR
Re: 383cu stroker pistone ? - 01/17/12 06:19 PM
Quote:
This is the same comp height when we ran with the 400 block,,,,and i dont think this has fallen out off favor ??? Same stroke,, same rod,, onley different bore size.
Maybe "fallen out of favor" was the wrong choice of words?
The 4.150 is not as "popular" now as it used to be, couple that with the 383 being the red headed step child of big block chryslers. It's in been the last few years that there are piston choices for the 383, but they are VERY LIMITED . Your best route is a semi custom Diamond piston.
Posted By: dogdays
Re: 383cu stroker pistone ? - 01/17/12 08:06 PM
Don't let the name fool you, semi-custom isn't that much more $$ than shelf stock on these Diamonds or the like. I think it's less than $100 to move the pin.
R.
R.