Posted By: Rich970
nitrous stick cars ? - 01/07/12 03:16 PM
I am curious about set ups whats being used for nitrous activation. timers, window switches, progresive ? thanks Rich
Quote:
Motor has 34 degrees of timing on the first stage. First stage is 100 HP with good gas. I also run the motor at 34 NA with pump gas. Second stage is 125 HP and take 6 degrees out only if i run the second stage. I turn both on in first gear. first stage is on as soon as i take off and second one is on a little past the 60 foot timers. I run a Rankin trans that is similar to a G-Force. Hope this helps
Quote:
No Problem. I run 2 regulators off a fuel log. One regulator for the motor is set at 7 pounds. Other Regulator runs both fuel solenoids and is set at 5 pounds. First stage is 57 square and 2 stage has a 64 square pill. I run a McLeod long style pressure plate with a Ram 6 puck disk. Best ET so far with both stages is 10.44 130.73 mph. Thats with a 2 1/2 inch exhaust with flowmasters. I know there is some more in it. Drove it to the tack and drove it home.
Quote:
No Problem. I run 2 regulators off a fuel log. One regulator for the motor is set at 7 pounds. Other Regulator runs both fuel solenoids and is set at 5 pounds. First stage is 57 square and 2 stage has a 64 square pill. I run a McLeod long style pressure plate with a Ram 6 puck disk. Best ET so far with both stages is 10.44 130.73 mph. Thats with a 2 1/2 inch exhaust with flowmasters. I know there is some more in it. Drove it to the track and drove it home.
Quote:
mshred your car looks great to. Have a picture of it on my computer