Posted By: 67valiant
sb bme rods - 12/29/11 08:22 AM
would any of you guys buy a set of use ones or should one stay away from them the piston skirts look new or very lil run time and the rods look like new
Posted By: LA360
Re: sb bme rods - 12/29/11 08:52 AM
I don't know if I would buy second hand Aluminium rods again, a piece of advise I would give you is to make sure the rod bolts screw in and out of the rod easily. If they bind as all, the big end has distorted.