Dana 60 questions

I have this here Dana 60



It is a brand new 8 lug single wheel "D" truck Dana, never ran unit with a 4.10 posi (Trac-Loc). It's going in the Ghetto-X, but I've never tried to use a Trac-Loc with 650+ hp (new bullet too ) and wondered if I should just spool it and forget it or attempt to use the posi? I will beat it like a red headed step-child (no red headed step children were harmed in the writing of this post ) and don't want to have to worry about the rearend.

Any input would be greatly appreciated

i tore up a posi with the same hp. go with the spool. it'll be ok on the street. seeya.

I have about 100 passes on the same set-up,,,no problems yet....foot braking. I have a brake in my trans, but not using it due to the posi unit..

Quote:

---

I have about 100 passes on the same set-up,,,no problems yet....foot braking. I have a brake in my trans, but not using it due to the posi unit.

You only about 200 hp beyond what a trac lock can handle.

It might last for a while, but that question mark will always be there. It won't be a matter of "if", but "when".

Brian Dunnigan

I don't recommend running 650 hp through a 30 spline Track-Lock.

What about a power loc?

A 35 spline Power-Lock is much stronger.

Quote:

---

A 35 spline Power-Lock is much stronger.

---

Mine is a 35 spline application. I'm not sure if it is Trac-loc or Power-Lock,,,what are the differences for identification??