Moparts

? for the Stick guys only..

Posted By: 5126brl No more

? for the Stick guys only.. - 12/17/11 10:04 PM

I am trying to see what rpm you are going thru the traps at and with what Gears and tire size.

I am trying to get some more rpm at the top end and do not want to swap out my 4.10's

right now I'm at 5400 with 29" street tires. And when i compare to my friends with autos I see alot of convertor slip.
Posted By: oldiron

Re: ? for the Stick guys only.. - 12/17/11 10:42 PM

bout 6200, i know the shift light comes on (6100) but either I don't remember or don't see it. Just getting old I guess.
28 x 9 tires
Posted By: 5126brl No more

Re: ? for the Stick guys only.. - 12/17/11 10:48 PM

What gear in rear?
Posted By: oldiron

Re: ? for the Stick guys only.. - 12/17/11 10:52 PM

oops - 4.10
Posted By: 5126brl No more

Re: ? for the Stick guys only.. - 12/17/11 10:54 PM

I remember your car White correct?
Posted By: rollerfork

Re: ? for the Stick guys only.. - 12/17/11 10:54 PM

I run a hoosier 29x9 slick Dana 4.10 gear 4-speed. Go threw at 6300 at 130 mph.

Attached picture 6971520-102_0782.JPG
Posted By: oldiron

Re: ? for the Stick guys only.. - 12/17/11 10:56 PM

Quote:

I remember your car White correct?



black top w/white bottom
Posted By: 5126brl No more

Re: ? for the Stick guys only.. - 12/17/11 10:59 PM

Quote:

I run a hoosier 29x9 slick Dana 4.10 gear 4-speed. Go threw at 6300 at 130 mph.




Great looking car... Love the slicks With Armoral
Posted By: rollerfork

Re: ? for the Stick guys only.. - 12/17/11 11:18 PM

Thanks, went a little overboard on tire shine
Posted By: 68 HEMI GTS

Re: ? for the Stick guys only.. - 12/18/11 12:02 AM

i was going through about 7,000 @ 130, at the same track its about 1 mph slower with an automatic 4.56 gear 29in tire. if it were a wedge i wouldn't be twisting it quite as hard.

http://youtu.be/HSUrUBZogDs
Posted By: rowin4

Re: ? for the Stick guys only.. - 12/18/11 02:40 AM

At 130 mph ,I never look at the tach. The shift light does come on just past the finish line [ 6800 ] with 4.56 and 30" tire
Posted By: Rich970

Re: ? for the Stick guys only.. - 12/18/11 02:58 AM

4.56 32" tire replay tach says 6900 7000.
Posted By: JD Dart

Re: ? for the Stick guys only.. - 12/18/11 03:33 AM

7225 rpm 154.99 mph 33" tall tires 4.33 gears
Posted By: 72Challenger

Re: ? for the Stick guys only.. - 12/18/11 11:53 AM

4.56 gears w/ 33" tires crossing the line at about 6700-6800 running 8.9's.
Switching to 4.88 gears next season.
Posted By: fasthawk6

Re: ? for the Stick guys only.. - 12/18/11 02:43 PM

27x 10.50 et streets with a 4.10 crossing at 6400 with 126 mph

Attached picture 6972290-dart.jpg
Posted By: 68LAR

Re: ? for the Stick guys only.. - 12/18/11 02:56 PM

Shift lite comes on just before the finish line, so trap rpm is around 6300 rpm with 29" tall slicks and 4.56 gears @ around 119 mph.
Posted By: mshred

Re: ? for the Stick guys only.. - 12/18/11 04:27 PM

with 4.10's and 28" tall ET streets im crossing the traps at about 5500rpms....my shift lite is set for 6k, so ideally i need more gear to really optimize the combo
Posted By: Rich970

Re: ? for the Stick guys only.. - 12/18/11 06:22 PM

Quote:

I am trying to see what rpm you are going thru the traps at and with what Gears and tire size.

I am trying to get some more rpm at the top end and do not want to swap out my 4.10's

right now I'm at 5400 with 29" street tires. And when i compare to my friends with autos I see alot of convertor slip.


Can i ask what rpm you leave and shift at, what trans , ?
Posted By: fourgearsavoy

Re: ? for the Stick guys only.. - 12/18/11 06:40 PM

With my Richmond 5-speed I trap in fourth gear(1.24)fifth gear is direct 1 to 1.
I run 3.54 gears,28" slick,6600 RPM,125.6 MPH
Now when I was running a 4-gear I ran 4.56 gears and would trap at just over 6300 with 28"slicks.
Gus

Attached picture 6972654-mysavoy.jpg
Posted By: 5126brl No more

Re: ? for the Stick guys only.. - 12/18/11 07:17 PM

Can i ask what rpm you leave and shift at, what trans , ?




On that day I was running M/T street pros and was leaving at 3000 rpm . Was a fine line to walk to get them to hook. Any higher and they spun. 29x15.50 Street pros. I am looking into a set of Slicks 26x12.5 to try and get the rpm up and get into second before the 60 ft lights.

Trans is a Hemi box that has pro shifted 2nd, faceplated 3-4 and a Ram adjustable clutch with a organic disc. Set at 2700# now any lower and it just powers thru the clutch.

At 3800 lbs and 590 hp I think I should get down to 11.20's at 122 or so. Old setup would 11.0's at 123 mph with 13x31 and 5.13's and 3400 lbs.
© 2024 Moparts Forums