Posted By: SCATPACK 1
which HEMI heads - 12/15/11 01:42 AM
If u were building a 572 HEMI to drag race in a 2800 lb car with auto and 4 link.
What heads would you run and why. Seriously looking at either the Stage 5 or the New Indy heads with the 2.40 intake valves
Posted By: MCHBOB
Re: which HEMI heads - 12/15/11 02:12 AM
Hands down Stage 5 the castings are nice.
Posted By: astjp2
Re: which HEMI heads - 12/15/11 06:43 AM
Talk about overkill, you can get a set of the stageV big valve custom heads from Tim Banning and get him to cnc port them. Then you add the T&D's rockers to those or Rockerarms.com rockers. You are looking at 1500hp capable setup. Tim
Posted By: 6PKRTSE
Re: which HEMI heads - 12/15/11 06:52 PM
I have a pair of Stage V's for my build (And yes with turbos).
Posted By: B1duster
Re: which HEMI heads - 12/18/11 07:27 PM
If u were building a 572 HEMI to drag race in a 2800 lb car with auto and 4 link.
What heads would you run and why. Seriously looking at either the Stage 5 or the ******New Indy heads with the 2.40 intake valves******
anyone use or have info on the new Indy 426 HiPo ????
Posted By: PUNK
Re: which HEMI heads - 12/19/11 12:47 AM
Raised port Stage V heads.
Posted By: Anonymous
Re: which HEMI heads - 12/19/11 02:17 AM
Quote:
Talk about overkill, you can get a set of the stageV big valve custom heads from Tim Banning and get him to cnc port them. Then you add the T&D's rockers to those or Rockerarms.com rockers. You are looking at 1500hp capable setup. Tim
That will run you $5000, $2500 for bare castings and $2500 for full machining. T&Ds apparently go for around $5000. Tim sells the Stainless rockers for around $3000.
Posted By: hemigod426
Re: which HEMI heads - 12/21/11 10:39 AM
i would not go with millenium heads they have prostock big chief ports,and only use GM prostock intake, valves are already insane 2.42 intakes with 6 inch stem, chambers are only 150 cc compared to 175cc on most. i would go with stage v raised port custom heads jobber is 2k bare 1k for valves,springs,cups,seals,retainers,bolts,gaskets, and 2.5k for complete roller setup with billet stands
Posted By: David Barton
Re: which HEMI heads - 12/21/11 03:24 PM
That will run you $5000, $2500 for bare castings and $2500 for full machining. T&Ds apparently go for around $5000. Tim sells the Stainless rockers for around $3000.
Our T&D/Barton rockers are available for the Millennium head too and retail for $3,495.00
David Barton
Ray Barton Racing Engines
610-693-5700