Posted By: toplescuda
Need front sway bar frame brackets - 01/13/24 01:55 PM
I didn't see a sub page to post this in....
I need a pair of the brackets that bolt to the frame rails that hold the front bushings up (sway bar bushings)
Need to be from a 80s up to at least 1990 dodge truck ramcharger (d100/d150)2 wheel drive NOT 4x4 as they are totally different
Thank you
Posted By: ruderunner
Re: Need front sway bar frame brackets - 01/13/24 02:01 PM
Iirc they're nothing fancy, could be made from channel though I believe OEM were Z shaped.
Posted By: toplescuda
Re: Need front sway bar frame brackets - 01/14/24 01:12 PM
Yes they are nothen fancy. At the moment I have no way of fab any of them
Posted By: dart4forte
Re: Need front sway bar frame brackets - 01/14/24 03:11 PM
I didn't see a sub page to post this in....
I need a pair of the brackets that bolt to the frame rails that hold the front bushings up (sway bar bushings)
Need to be from a 80s up to at least 1990 dodge truck ramcharger (d100/d150)2 wheel drive NOT 4x4 as they are totally different
Thank you
I think I have a couple in my suspension box.
Posted By: toplescuda
Re: Need front sway bar frame brackets - 01/15/24 09:43 AM
That would be awsome if you did.
Let me know please
Posted By: dart4forte
Re: Need front sway bar frame brackets - 01/16/24 10:47 PM
Sorry, got waylaid, I’ll check tomorrow. Just to be clear, you need the two front brackets?
Posted By: dart4forte
Re: Need front sway bar frame brackets - 01/16/24 11:00 PM
That would be awsome if you did.
Let me know please
Ran out to the shop, I have a PST packaged brackets and bushings
Posted By: toplescuda
Re: Need front sway bar frame brackets - 01/19/24 09:32 PM
I think I located a pair. Will know f9r sure this weekend. Thanks guys
Posted By: Hooligan
Re: Need front sway bar frame brackets - 01/28/24 07:54 PM
If all else fails. I had a1974 D100 without the factory front sway bar. I'm not sure what year trucks have the same frames. Well, I wanted a larger diameter anyway. I bought a 1.125" bar from a '72 Chevy C10. It came with mounting brackets, which I bolted right to the bottom of the frame rails.
Looked way better than the factory bar hanging down bellow the strut rods. Dilled holes in the lower control arms for the supplied 90 degree brackets. Just had to grind a little clearance on the lower control arms for the end link bolts.
Posted By: toplescuda
Re: Need front sway bar frame brackets - 01/29/24 05:44 AM
I have found some brackets. Thanks every one