Temperature control cable?

I’m in the process of restoring my grandads 74 model D100, the heater temp control cable froze up years ago and since then the only way to control cabin temp was to open the hood and adjust the temp control valve by hand. I’ve bounced around the web and the usual vendors and can’t seem to locate one…anybody got any leads as to who might have one??? Thanks in advance

fpb shows w/a/c- 28909041
temp cable w/o a/c- 3635277
heater/def cable- 2884730
which do you need. i had some nos ones last year, not sure if i still have them but will have to look in 3 different places.

If you find out the length of your cable you might also be able to use a reproduction one for a B or E Body application. The other choice is if you have a lawnmower shop they might be able to make one as well.

Well if it's the 2884730 here's a NOS one

https://www.ebay.com/itm/394115789874?

couple guys on the Dodge FB group say take your old cable to a motorcycle shop and they can make you one to fit.

a good bicycle shop could make one as well.
please let us know how you make out with this quest.

Will do, restoring this truck is turning into an adventure, a few years ago I found the old temp control cable Ty wrapped under the dash and was going to try and repair and reinstall it, couldn’t find the hole in the firewall where t was supposed to pass through and I ended up giving up…now that I have all the sheet metal off the front of the truck I figured out why (lol) somewhere in this trucks past somebody ran the antenna cable through the temp control cable hole instead of the hole designed for the antenna cable that is behind the passenger door jamb…
Meanwhile, I’m taking everyone’s suggestions to thought on fixing the temp control issue while I wait on engine parts

this is from my factory parts book.

Thanks trw, appreciate it, now if I can just find one…