'92 E.X.D. WHEEL BEARING

Local body shop who's doing some work for me has a 92 Dodge Diesel, 1-ton 2 WD, extra heavy duty.

They CANNOT find a front right wheel bearing for it. Advance, Azone, etc. can't find one. I sure they've tried Dodge as well.

Anyone know of or might have a source for it? Thanks ( I may score some points with them ( discount ) if you can help me )

check here linky I assume it's the 4000 lb option? Disco'd, use the part numbers in google, you might turn something. 2¢

timken set 45 is the largest set listed on rockauto.

They must know the part number is listed right on the bearing and race right? I know the hub stuff is hard to find, and chrysler parts those years are MESSED up (ala rear leaf bushings for a 92 w250)

If you have the numbers from the bearings you could look them up online rather than using the MOpar part number. Some times the bearings are used in other applications. I have foound hard to get bearings from a bearing supplier..

All the diesel trucks had the 4000 pound front axle rating. Napa shows several different ones.

Truck sustained suspension damage, wheel and suspension were tore up pretty bad. I guess the driver's side would be the same?

Get the numbers stamped on the cups and cones. Seal too.

Not uncommon but most catalogs have inaccurate listing.

don't have your vin number, but mopar parts giant shows inner seal number as 1790546---inner bearing and race as 1937770 and 1937771 and outer bearing and race as 3820197 and 1139293. bearing numbers cross on napa online web site. if you put vin number in at mopar parts giant it will probably give you the same numbers. this is the same parts lookup the dealers use. those are real old numbers, like in the 70/80's