Lower dash panels for the 95 Ram

You no the peace below the steering column anyone remanufacturing a replacement (better quality peace than the factory did) yet?

If you're talking about the knee blocker or knee bolster a google search doesn't show anyone having them new.

Yep ...that's it the one from the factory were cheap plastic
Does any of the newer rams interchange ?

I have two second gens and both are in original condition. You should not have a problem finding one in a junk yard, ebay or craigs list.

What problem are you having with them?

They're all going to be plastic.
94 through 2001 (2002 HD) are "probably" all be the same.

They are deteriorating from age the truck only have a 133,000 i thought Dodge would have better plastics on there newer trucks.

Maybe i'll just check the salvage yards.

Age is not the factor but heat/sun is.Heat/sun will make the plastic brittle over time. If you look at the junks yards try to find one that doesn't have sun faded interior. If buying off ebay choose someone that doesn't live in a hot sun belt location.

I had this truck sense 96 it did spend much of it's time outside, now it's in the garage

I won’t do any dash work on anything that old at work (95-05).... to much liability on destroying a lot of unobtanium

Does the later model panels use a clip? Mine has screws.

for this.. sense the weather is suppose to be nice heading out today, the ones that i have seen were clips.

Well found out the 98's are different ,they were shorter 18" wide verse the 95 which are 21" wide the 98 also use clips and the 94-95 use screws.