Posted By: moparmatt
Finally Restoring 78' 440 Power Wagon ?'s - 03/30/19 08:48 PM
Finally getting after my 78' 440 Power wagon, I need advice on where to purchase window and door seals? also its an adventurer so Also need the big 3" molding fasteners with the antennaes sticking out not crazy about spending $7-$10 each since it takes about 26? Also best supplier for taillightlenses looks like legendary on seat kits any advice on parts appreciated nice rust free NM truck but of course no rust just all soft trim and rubber needs replacing!
Thanks For Advice!!
Posted By: moparmarks
Re: Finally Restoring 78' 440 Power Wagon ?'s - 03/30/19 11:48 PM
The Dodge Connection on here has all the door and window seals as wall as other parts. Start there first..
LMC has stuff but some of their parts are cheap junk. Some is good.
Legendary has seat covers.
Posted By: Hugh Jorgan
Re: Finally Restoring 78' 440 Power Wagon ?'s - 03/31/19 12:00 AM
You can get the molding fasteners 3D printed.
Posted By: RUNCHARGER
Re: Finally Restoring 78' 440 Power Wagon ?'s - 03/31/19 12:04 AM
Precision makes the window seals. Those chrome clips were used until about 90 I think. I can usually find used ones when I need them. It might be tougher in a hotter climate though. This one was a 440 truck as well. I kind of miss it.
Posted By: basketcase
Re: Finally Restoring 78' 440 Power Wagon ?'s - 03/31/19 12:32 AM
If the '80s molding clips are the same as the earlier ones, I have some. PM me.