Posted By: 68dodge
How low can I take it? - 10/17/15 02:55 PM
Have a 76 D-100 I already lowered 2" up front, is there any way to go lower with out having any alignment issues? Any one ever move the upper control arms?
Posted By: Iowan
Re: How low can I take it? - 10/17/15 03:50 PM
I've herd of using van control arms to lower pu's but not sure what's involved.
Posted By: 68dodge
Re: How low can I take it? - 10/17/15 03:54 PM
I've herd of using van control arms to lower pu's but not sure what's involved.
3
I know about the lower control arm swap, but I want to go lower than a 2" drop.
Posted By: BulletBob
Re: How low can I take it? - 10/17/15 11:11 PM
I got 3' out of mine
Dakota dropped spindles work too
Posted By: 76dodgeboy
Re: How low can I take it? - 10/26/15 09:34 AM
Van arms or cut coils along with Dakota Drop Spindles.
Posted By: C_Notch
Re: How low can I take it? - 10/30/15 03:40 AM
I used van lca, dakota drop spindles, and cut one full coil from springs. Front frame rail sits 9 1/4" off the ground. LCA and crossmember are a little over 2" off ground.
I run 255/55/17 up front and 285/70/17 rear
Posted By: 76dodgeboy
Re: How low can I take it? - 10/30/15 04:50 PM
Got any pics? Thats the tire size Im considering