Rear rotors removal on a 2500

Posted By: Lawn Monkey

Rear rotors removal on a 2500 - 04/18/15 06:36 PM

Doing rear brakes tomorrow on a 2500 , with the calipers and mounts removed do the rotors just slide off? Or do I need special tools?

Posted By: Guitar Jones

Re: Rear rotors removal on a 2500 - 04/18/15 09:38 PM

They'll come off but they may need some persuasion from a BFH.

Posted By: Lawn Monkey

Re: Rear rotors removal on a 2500 - 04/18/15 11:02 PM

Cool thats what I was hoping to hear , got the BFH ready

Posted By: mopars4ever

Re: Rear rotors removal on a 2500 - 04/19/15 03:40 AM

Yes, mine were very rusty but they came off which some patience. spraying and hammering.

Posted By: rickstershemi

Re: Rear rotors removal on a 2500 - 04/19/15 09:53 PM

Originally Posted By mopars4ever

Yes, mine were very rusty but they came off which some patience. spraying and hammering.

A little heat helps as well.....

Rickster

Posted By: Lawn Monkey

Re: Rear rotors removal on a 2500 - 04/20/15 03:35 AM

Stuck tight, tried BFH,pry bar and a slap hammer no budge , going to purchase a puller

Posted By: stumpy

Re: Rear rotors removal on a 2500 - 04/20/15 04:36 AM

What kind of emergency brake setup do those use?

Posted By: Michael

Re: Rear rotors removal on a 2500 - 04/20/15 01:38 PM

Let's hope he released the emergency brake.

Posted By: therocks

Re: Rear rotors removal on a 2500 - 04/21/15 08:21 PM

hope the Ebrake if inside dosnet fall apart.I had a bunch at the shop that the linings fell off the E shoes.I spray penetrating fluid around the hub and then smack the rotors and they usually pop. Then antisieze when I reinstall the new rotors.Rocky

Posted By: Lawn Monkey

Re: Rear rotors removal on a 2500 - 04/22/15 08:03 PM

E brake working fine , not tight don't think its hung up on the e brake, searching for a puller.