Magnum Motor into a 79 D150

magnum, he is changing intake and distributor. everything else is magnum

Here's the Magnum in my 85 SWB using the factory serpentine

Did you use the magnum ps pump?

At one point I had a Magnum 360 in my '85 truck. I had a 904 behind it, with a carb intake and electronic ignition distributor. Other than that it was as is from a truck. You have to have the truck P/S bracket, the van one wont work--it'll hit the frame. the only other thing I noticed using the 904, was there is a boss that needs to be shaved down on the block, the starter will hit it and will not sit in there straight.

Use a set of regular pre magnum 360 mounts and magnum radiator hoses for a 1993 truck and it all just falls in place.

So the magnum pump works ok with stock steering box?

yup, I hooked my stock hoses right to it.

Thanks for the photos and tips.

I am hoping to use the Fuel injection and computer from the Van, really want to use the overdrive as well.

I used 92 model hoses on my last few swaps using the Magnum serpentine
80 model & down you change the fitting in the back of the pump from the original to the truck