Posted By: RUNCHARGER
Crappy Dana 60's anyways. - 07/01/14 02:32 AM
I guess the old 440 puts out more torque than the Cummins this front axle came out of.
Sheldon
Sheldon
Crappy Dana 60's anyways.
Posted By: RUNCHARGER
Re: Crappy Dana 60's anyways. - 07/01/14 02:33 AM
Yeah it's hurt, it won't be the last time either.
Sheldon
Sheldon
Posted By: RUNCHARGER
Re: Crappy Dana 60's anyways. - 07/01/14 02:34 AM
Nothing a stock SUV couldn't do.
Sheldon
Sheldon
Posted By: Mpetros
Re: Crappy Dana 60's anyways. - 07/01/14 03:15 AM
Runcharger You seem pretty sharp.. But I didn't if You knew Dana Makes a Factory Dana 60 35 Spline Outer to Replace that stock 30 Spline outer.. The part number is 3-82-871 and they are fairly reasonable..Dana also makes a 35 spline Solid Drive Puck too
www.Greensburgmachine.com
www.Greensburgmachine.com
Posted By: RUNCHARGER
Re: Crappy Dana 60's anyways. - 07/01/14 03:37 AM
Thanks: He's going Chrome Moly axle shafts on it. It's got a 35 spline D.Locker in it and we were expecting some carnage eventually. I'll pass the part # onto my son though in case he's too broke to buy the C/M shafts right now.
Sheldon
Sheldon
Posted By: CTD5.9
Re: Crappy Dana 60's anyways. - 07/01/14 08:41 PM
if the tire is still connected to the truck, it's not THAT bad.....stupid dana 44's 