Posted By: old_goat
Hey Scratch! - 03/27/14 05:28 AM
Its going on the 84 in 10 days...
Hey Scratch!
Posted By: scratchnfotraction
Re: Hey Scratch! - 03/27/14 02:38 PM
SSSWWWWEEEEEEETTTTTT!!!!!!! x2 
looks great. make sure to post up how the throttle linkage hooks up. trans linkage or cable?
looks great. make sure to post up how the throttle linkage hooks up. trans linkage or cable?
Posted By: 340SHORTY
Re: Hey Scratch! - 03/27/14 09:15 PM
Posted By: Golden-Arm
Re: Hey Scratch! - 03/27/14 11:09 PM
you shouldnt be posting porn, in the truck section......
Posted By: BulletBob
Re: Hey Scratch! - 03/28/14 03:22 AM
Like I said Bill It looks greatBetter than Playboy!
Posted By: old_goat
Re: Hey Scratch! - 03/28/14 04:43 AM
Quote:
SSSWWWWEEEEEEETTTTTT!!!!!!! x2
looks great. make sure to post up how the throttle linkage hooks up. trans linkage or cable?
Thanks!
I will post pics when done.
Cable kickdown. Just going to hook it to the rear carb like on my single edelbrock on the p rpm. I will fab a bracket for it. The cable is plenty long. I am going to get a new braided throttle cable, as my old one is too short for the way I am hooking it up. Fabbed bracket there too.
Then for the hood...
I know the exact shape for the hole, and how I am going to roll the edges of it. Just have to wait till the setup is on the engine to locate it exactly.
Posted By: old_goat
Re: Hey Scratch! Update! - 04/11/14 01:52 AM
I've been too covered up on weekends to get this on the truck, but I did get the linkage and cables sorted out.
I think it turned out great! Top cable is throttle, bottom one kick down.
I can't wait to get it on the truck now. I am doing side work the next 2 weekends, so as soon as I install it I will post pics.
I think it turned out great! Top cable is throttle, bottom one kick down.
I can't wait to get it on the truck now. I am doing side work the next 2 weekends, so as soon as I install it I will post pics.
Posted By: BulletBob
Re: Hey Scratch! Update! - 04/11/14 02:12 AM
Wasn't all that hard was it? Looks good!
Posted By: old_goat
Re: Hey Scratch! Update! - 04/11/14 02:15 AM
So simple a cave man could do it!
Posted By: 76dodgeboy
Re: Hey Scratch! Update! - 04/11/14 02:15 AM
I have one for my 383 that's going in my 80 this summer
Posted By: 77ProStreet
Re: Hey Scratch! Update! - 04/11/14 05:40 AM
Hey Old Goat, is that Lokar cables I see there? That's what I used on my tunnel ram... 
Good stuff! You'll like it.
Good stuff! You'll like it.
Posted By: old_goat
Re: Hey Scratch! Update! - 04/12/14 03:51 AM
Not lokar, but similar. A seller on ebay has both cables with brackets for about 80 bucks. The linkage between the carbs came from summit. All of it is good quality stuff.
Posted By: 340SHORTY
Re: Hey Scratch! Update! - 04/12/14 04:27 AM
that would be kick butt with a pair of Holleys..
Posted By: Webster
Re: Hey Scratch! - 04/12/14 04:37 AM
Quote:
Its going on the 84 in 10 days...
Ok Man the 10 days are up...
Posted By: old_goat
Re: Hey Scratch! - 04/12/14 04:55 AM
Quote:Quote:
Its going on the 84 in 10 days...
Ok Man the 10 days are up...
Yes Terry, read above where update starts. Just too busy!