Posted By: venom107
Warlock "econo" smog 440 build - 02/25/14 05:33 AM
Ok, so.............. I kinda blew up my 400. Well, maybe just broke it real good. I might post that video later. Hears the deal, I have a 440 that I am going to build. I have started collecting parts, but I will not start it until I have the money to do it right. I also have a 78 motorhome 440 with 28,000 miles. It is as clean as a pin. This is my econo build.
My original plan was to get my heads for my big build and use the springs, retainers and lock for the smoger. I don't have the money for the heads yet. I was going to go with Lunati 268 voodoo. Now that my 400 is down, I am looking for advise.
Here is what I have.
Mystery cam: 465 lift (that's all I know) out of the 400.
Edelbrock Performer 440
HV oil pump
Ok, that's about all I have for the smog motor.
Here are the rules: Bolt on only. I will not even pull the heads. I don't have to use what I have, but this is a buget. I do also have. A set of Crane 1.6 rockers and push rods for my other build that could be borrowed.
Looking for advise, what would you do?
![8052088-image.jpg Attached picture 8052088-image.jpg](https://board.moparts.org/ubbthreads/upload2/8052088-image.jpg)
My original plan was to get my heads for my big build and use the springs, retainers and lock for the smoger. I don't have the money for the heads yet. I was going to go with Lunati 268 voodoo. Now that my 400 is down, I am looking for advise.
Here is what I have.
Mystery cam: 465 lift (that's all I know) out of the 400.
Edelbrock Performer 440
HV oil pump
Ok, that's about all I have for the smog motor.
Here are the rules: Bolt on only. I will not even pull the heads. I don't have to use what I have, but this is a buget. I do also have. A set of Crane 1.6 rockers and push rods for my other build that could be borrowed.
Looking for advise, what would you do?
![8052088-image.jpg Attached picture 8052088-image.jpg](https://board.moparts.org/ubbthreads/upload2/8052088-image.jpg)