Moparts

'83 D-150 silly question

Posted By: slantzilla

'83 D-150 silly question - 12/18/13 12:34 AM

My 318 has no choke thermostat in it. I have one to put in, but where does the wire attach to?

The wiring was heavily "modified" by a previous owner. There used to be a wire coming off a field wire, was that it?

Thanks!
Posted By: 3hundred

Re: '83 D-150 silly question - 12/18/13 12:47 AM

If I remember, that's an electrically assisted choke. There is a three prong switch back by the distributor the wire attaches too. It will feed power to the choke only when the key is on and there's oil pressure.

Robert
Posted By: 500ciDuster

Re: '83 D-150 silly question - 12/18/13 04:11 AM

I thought power feed is blue which split off the blue field wire
Posted By: slantzilla

Re: '83 D-150 silly question - 12/18/13 04:43 PM

Thanks guys!

I am going to go with the field wire. I got hold of a complete intake and there is no evidence of a timer on it.
Posted By: 3hundred

Re: '83 D-150 silly question - 12/18/13 04:49 PM

Found it, see attachment.

Robert

Attached picture 7962833-84wirdiaglb1-2.jpg
Posted By: 3hundred

Re: '83 D-150 silly question - 12/18/13 09:11 PM

Since it's just an emission control device I think I'd snip the wire and call it good.

Robert
Posted By: slantsic

Re: '83 D-150 silly question - 12/23/13 02:06 AM

try finding an older non electric thermostat. if you just snip the wire it may open to slow causing it to run rich longer.
Posted By: 76dodgeboy

Re: '83 D-150 silly question - 12/23/13 09:11 AM

Its Not an emissions item. it helps control the Choke
© 2024 Moparts Forums