Custom 3d print hood emblems/badges?

Does anyone here do this?
I kicking around a ideal...
Friend has a 2wd 90 ramcharger that will be done in a hot rod theam
Bought a hood that has a 73-74 road runner skin grafted on it
Later will have the road runner decal put on after its had body work and paint done to it......
My thought was....have a gtx emblem made(factory style) but. Have the X changed to a capital R and smaller font amcharger
GTRamcharger......thoughts?

It defiantly can be done but cost prohibitive. The original needs to be replicated in CAD, then modified. The conversion to 3D and printing are going to be the cheap parts. I would suggest you look on sites like " Grabcad" (or similar) and see if there is something to start with. Otherwise it will need to be scanned with a 3d scanner, modified in CAD, then printed...
do you have a pic of the emblem?

Well the emblem I want does not exist
I had a grill emblem for boys 70 cuda. Instead of plymouth. It read ol rusty. And came out pretty good. But I have no way of contacting the person that done the work anymore.
So just as it was custom made this one will be also

The orignal gtx emblem
And a extremely ruff sketch of what I had in mind

might check with this guy he does some amazing quality stuff in plastics
www.3DscaleParts.com

Tell him the Old man from across the street sent you

Says I have to log in

i know a emblem would be way cooler.
but you can easily and significantly cheaper have that made in a decal.

if you want shadowing they put one decal on top of another to create this effect.

PM me off to the side I think I can help you.

I would go with Ramcharger R/T,it is a Dodge afterall!

Scroll down a bit to the contact us link

This all there is in the link sent me.

With a plymouth hood skin

A decent drawing with accurate measurements is all a guy needs to be able to program and print a part.

photo 1 is a wood replacement someone made
photo 2 is an original NOS part
photo 3 is my drawing
photo 4 is the 3D printed prototype

This what I get on my desktop he's also on facebook I'll send him a message as well

To the OP, Clean out your message box and I'll PM you his direct address

D9ne thank you

Still showing full/ Over private topic limit PM me your email and I'll send it that way

Got a message from you and replied to it, Also sent an email to the address you provided

yah i have posted in couple other sites those of us that have the 80-83 cordobas could use a couple pieces printed

just sent you a PM

Just checking to see if you got the PM as the email you sent me bounced back ?