Moparts

remove rust floor pan (small area)

Posted By: Dodge33

remove rust floor pan (small area) - 09/29/11 07:19 PM

hello,I GOT SOME surface rust on a small area(passenger front
floor pan from window being left down,the person I bought the car
from did not think is was important to roll up the window) I did not
want to media blast inside because the rest of the floor has good paint on it.
what can I use to eat the rust? thanks for any help
Posted By: Neil

Re: remove rust floor pan (small area) - 09/29/11 08:13 PM

Make a dam around the area out of clay and pour some Evaporust inside and let it sit for a day or so.
Posted By: SeventySatellite

Re: remove rust floor pan (small area) - 09/30/11 06:59 AM

Quote:

Make a dam around the area out of clay and pour some Evaporust inside and let it sit for a day or so.




After Evaporust can you just clean and prep for epoxy?
Posted By: Neil

Re: remove rust floor pan (small area) - 09/30/11 07:14 PM

Evaporust leaves behind a sricky film on sheet metal.

I'd wipe it down with reducer and then sctotchbrite pad some PPG DX metal prep over the area before painting.
© 2024 Moparts Forums