70 Cuda - Door Hinges: do I have to remove fenders?

Doors are sagging and I need to correct this problem. Can someone guide me on which is the best set of hinges or which set of pins to buy?

Also, as the heading says, do you know if I have to remove the fenders to remove the door hinges for this repair. I hope that is not a dump questions, but its late and dark outside for me to look right now. It's scary out there, too!

thanks in advance

Remove doors: No

Door Hinges: Contact Rick @ http://restorick.com/

To help keep your sanity, I would suggest that you change them one at a time, while the door is open and supported. Start with the most worn (usually top) and align before removing the other one.
And no, you do not have to remove the fenders.

Quote:

---

To help keep your sanity, I would suggest that you change them one at a time, while the door is open and supported. Start with the most worn (usually top) and align before removing the other one.
And no, you do not have to remove the fenders.

---

Sounds advice right here.
If you can get a buddy to assist, that helps a tonne!