70 cuda headlight stainless trim

Are both sides interchangeable? I only have one side and need to know if there is a right and left or if this piece fits both sides...thanks Moparts!

http://imageshack.us/photo/my-images/98/img2902v.jpg/

There is a left and a right. They are close, but different.

If you are talking about the stainless ring that holds the headlight in - there is no left or right.....Both sides are identical. OOOPS! Just looked at your photobucket pic...You were talking about the bezels.

OK....I really didn't want to have to take the one I have on the plane to Carlisle but I probably will because I have no idea how to tell which side is which...it was not on the car when I got it, it was loose, so I will pack it up! Thanks!

Ah but wait....I found out that I have the drivers side so I will NOT need to pack it with me...just need to look for a passenger side at the swap....all is well! Thanks!

They should be stamped "L" and "R" if I recall

Hi Pete,
That would sure be handy ...I turned mine every which way to see if I could see an "L" stamped into it somewhere,could you head me in the right location to look? Thanks!

see photo of the LEFT side stamped "L" on the outer edge. Sorry I don't have a photo handy of the corresponding side stamped "R".

Left as in drivers side I assume?