spark plug wire holder

I am putting my exhaust manifolds on and I am lost as to where the wire holders go with manifolds..68 gtx w/440..any help would be appreciated..

this help

http://amhightechauto.com/images/parts/Wire_Kit_1.jpg

http://amhightechauto.com/images/parts/Wire_Kit_2.jpg

Bill - There are a few of those brackets I don't agree with for an HP engine.

Jim,
I don't agree with it 100% ( but I'm not the one who made it either) , especially the L shaped bracket on the forward end of the drivers side cyl head should not be there on a B or E body

I can probaby put a similar sheet together for 69-70 stuff.....I don't have any 68's. I think I have some good printed pics of a 67 I had...need to scan those.

Thanks for the great info