AMD full floor pans come with gas pedal holes drilled?

Posted By: Black_Bee

AMD full floor pans come with gas pedal holes drilled? - 12/02/10 10:44 PM

Hey guys!

I had the full front floor pan in my '69 Super Bee replaced with an AMD piece. I also had the floors coated with Lizard Skin heat shield and sound deadener.

The body shop taped off all the holes before spaying the Lizard Skin, and since it goes on pretty thick, I'm having a hard time finding the ones for the gas pedal, and don't want to start digging around if they aren't even there.

Thanks!

Posted By: 1hot68

Re: AMD full floor pans come with gas pedal holes drilled? - 12/02/10 11:51 PM

I installed a AMD floor in my 69 Charger. I had to drill the holes for the pedal.

Posted By: Black_Bee

Re: AMD full floor pans come with gas pedal holes drilled? - 12/03/10 12:59 AM

Quote:

I installed a AMD floor in my 69 Charger. I had to drill the holes for the pedal.

Thanks for the info!

Posted By: BarrsRestoration

Re: AMD full floor pans come with gas pedal holes drilled? - 12/04/10 12:38 AM

Same here. Also applies to the dimmer switch holes, you'll need to drill those too.

Steve

www.clarkclassic.com

Posted By: a12superbee

Re: AMD full floor pans come with gas pedal holes drilled? - 12/04/10 02:13 AM

I would try looking from the bottom.

Posted By: cudastruction

Re: AMD full floor pans come with gas pedal holes drilled? - 12/04/10 03:23 PM

Yeah, I am not sure about that piece but sometimes there are dimples where you might need to drill a hole.

Posted By: BarrsRestoration

Re: AMD full floor pans come with gas pedal holes drilled? - 12/05/10 05:07 PM

No dimples on that pan.

Posted By: Black_Bee

Re: AMD full floor pans come with gas pedal holes drilled? - 12/05/10 11:19 PM

Quote:

I would try looking from the bottom.

I tried looking from the bottom too, but it is covered in new thick undercoat too!