Headliner rear bow retainer wires

I'm doing some research on these...
I have two pair I'm not sure of there application.

Anybody have some handy to measure for me?
Any and all models please!!

Thanks!
Rick

I need a set myself.

Ken

I plan to make some once I get some verified measurements...

here is my donation to mopar science
this one 100% came from a
69.5 a12 superbee

I don't know what those are for, but I'm putting a headliner in a '72 RoadRunner with a 4 bow headliner and they measure 5 7/8.

A great start.
The two pair I have are likely E-body ones, but I'd thought one was from a '69 Bee I parted years ago... guess not. I have a 71 Cuda I'm checkin' out today.

PLUM BAD, they plug into the rear roof crossmember and hold the rear-most bow from falling forward as the headliner is drawn tight.

Thanks,
Rick

Rick I meant I didn't know what cars the ones you pictured were for. Sorry. I found another from a 68 Charger and remeasured the one from the Roadrunner. I was in a hurry last night, so I was off with the measurement.

72 Roadrunner with 4 bows is 5 3/4.
68 Charger is 7 1/8.

Thanks! That's perfect...
I got the 71 Cuda ones yesterday.

I concur the 5 3/4" size on a 4 bow 71 Charger B body......

I just use a piece of binding wire, once the headliner is up the wire is completly hidden.

Now available...
made with the same dia. wire using spring temper stainless steel.

Rick

bump

Feel free to PM or email me dimensions if you're shy...

Rick

I still need dimensions on 1972-1974 Barracuda 4-bow!!

Anyone have one to measure?!

Thanks,
Rick

Anyone have the dimensions of these for a 70 challenger? i need to make some asap !

4 7/8 i made some and worked great.521 restorations repops all of these wires but i didnt have time to wait.

We have them available on our website.
E-body headliner bow retainer