Posted By: sunroof446
Shaker 440 4bbl feet placement help - 04/01/10 12:35 PM
Hi, Does any one have pictures/info on shaker support bracket location for a 440 4bbl. THANKS, JOE.
Quote:Got the measurements. Thanks, JOE
I'm not certain 440-4bbl shakers had feet. If they did, I'd guess the tabs would have been positioned the same as on a 440-6. I can get some measurements off a sixpack base if you want them. Moparts member mccanix probably can clear that up. I feel like he had the engineering drawings and it showed no feet for the 4bbl. There's also a post here about the MATS show. There was an original 440-4bbl shaker car there. I know the owner and can send him an email to see what he had (assuming he had the original base). I think a 440-4bbl shaker is probably the rarest of the shakers.
Quote:Correct...no feet provisions for a 440 shaker base. They were super low production. The 440 shaker base does not have the hole in the front boss like most 383 shaker bases that housed the rod style foot.Quote:Got the measurements. Thanks, JOE
I'm not certain 440-4bbl shakers had feet. If they did, I'd guess the tabs would have been positioned the same as on a 440-6. I can get some measurements off a sixpack base if you want them. Moparts member mccanix probably can clear that up. I feel like he had the engineering drawings and it showed no feet for the 4bbl. There's also a post here about the MATS show. There was an original 440-4bbl shaker car there. I know the owner and can send him an email to see what he had (assuming he had the original base). I think a 440-4bbl shaker is probably the rarest of the shakers.