ramcharger hood

Posted By: f6bee

ramcharger hood - 03/07/10 01:35 PM

I have a 69 coronet with a ramcharger hood. I would like to take it apart to do some minor repairs but dont know where I can get the rivets to put it back together and what kind of a tool do you need.I'm going to pick up some of the watco danish oil.can't wait to try it thanks

Posted By: 340dart4spd

Re: ramcharger hood - 03/07/10 02:49 PM

Quote:

I have a 69 coronet with a ramcharger hood. I would like to take it apart to do some minor repairs but dont know where I can get the rivets to put it back together and what kind of a tool do you need.I'm going to pick up some of the watco danish oil.can't wait to try it thanks

ebay has them....

here http://cgi.ebay.com/ebaymotors/1968-1972...sQ5fAccessories

Posted By: MrNormsTA

Re: ramcharger hood - 03/07/10 03:29 PM

Quote:

I have a 69 coronet with a ramcharger hood. I would like to take it apart to do some minor repairs but dont know where I can get the rivets to put it back together and what kind of a tool do you need.I'm going to pick up some of the watco danish oil.can't wait to try it thanks

Are you talking about the rivets that were pushed over using a set tool and had the 6 pedals that flattened out to hold?

Posted By: Quikshft

Re: ramcharger hood - 03/07/10 04:48 PM

When I disassembled my airbox, I removed the rivits without destroying them and re-used them to put it back together. Some are difficult to get at but using small tools to bend each of the 'petals' so the rivit could be removed is certainly possible.
Not sure where you could find something similar to use as replacements.

Posted By: 340dart4spd

Re: ramcharger hood - 03/07/10 10:00 PM

this guy sells the rosette rivets

http://www.theramman.com/disk1pics.html